[Nut-upsuser] driver looking for MAXIM MXE II

[Arnaud Quette]

You will need at least 2.6.4 for this unit, but it's really blazer_usb.

Cheers,
Arnaud
(sent from my S3... please excuse my brevity)
Le 23 nov. 2012 09:40, "Walter O. Dari" <wlinuxw at gmail.com> a écrit :

> Results:
>
> wodari at svrsw2:/usr/local/**MonitorSoftware$ lsusb
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> 1
> ------------------------------**------------------------------**
> ------------
> ups.conf
>
> [maxim]
>     driver = blazer_usb
>     port = auto
>     desc = "SW servers"
>
>
> wodari at svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'subdriver', 'vendorid' and
> 'productid'
> options specified. Please refer to the man page for details about these
> options
> (man 8 blazer).
>
> Driver failed to start (exit status=1)
> ------------------------------**------------------------------**
> ------------
>
> 2
> ------------------------------**------------------------------**
> ------------
> ups.conf
>
> [maxim]
>     driver = megatec_usb
>     port = auto
>     desc = "SW servers"
>
>
> wodari at svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
> Serial-over-USB transport layer 0.10
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'vendorid' and 'subdriver' options
> specified. Please refer to the man page for details about these options
> (man 8 megatec_usb).
> Please report your results to the NUT user's mailing list
> <nut-upsuser at lists.alioth.**debian.org<nut-upsuser at lists.alioth.debian.org>
> >.
>
> Driver failed to start (exit status=1)
> ------------------------------**------------------------------**
> ------------
>
> 3
> ------------------------------**------------------------------**
> ------------
> ups.conf
>
> [maxim]
>     driver = bcmxcp_usb
>     port = auto
>     desc = "SW servers"
>
>
> wodari at svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
> USB communication subdriver 0.18
> Can't open POWERWARE USB device, retrying ...
> Can't open POWERWARE USB device, retrying ...
> Can't open POWERWARE USB device, retrying ...
> ------------------------------**------------------------------**
> ------------
>
> 4
> ------------------------------**------------------------------**
> ------------
> ups.conf
>
> [maxim]
>     driver = tripplite_usb
>     port = auto
>     desc = "SW servers"
>
>
> wodari at svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> No matching USB/HID UPS found
> Driver failed to start (exit status=1)
> ------------------------------**------------------------------**
> ------------
>
>
> More info...
>
> I'm use Debian Squeeze
>
> wodari at svrsw2:~$ uname -a
> Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
> GNU/Linux
>
> wodari at svrsw2:~$ upsrw maxim
> Can't connect: Connection failure: Connection refused
>
> wodari at svrsw2:~$ upscmd -l maxim
> Error: Connection failure: Connection refused
>
>
>
> Walter
>
>
>
>
> El 23/11/12 04:18, Arnaud Quette escribió:
>
>> HolÃ
>>
>> Try blazer_usb. Please report back if everything is working as per
>> http://www.networkupstools.**org/stable-hcl.html#footnotes<http://www.networkupstools.org/stable-hcl.html#footnotes>
>>
>> Cheers
>> Arnaud
>> (sent from my S3... please excuse my brevity)
>>
>> Le 21 nov. 2012 23:13, "Walter O. Dari" <wlinuxw at gmail.com
>> <mailto:wlinuxw at gmail.com>> a écrit :
>>
>>     Hello:
>>
>>     I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
>>     Connects to the PC by a USB 2.0 port.
>>     I wanted to use nut, but this brand is not on the list of nut drivers.
>>
>>     lsusb returns:
>>
>>     ...
>>     Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
>>     ...
>>
>>     I did not find this manufacturer in the driver list.
>>
>>     Anyone know if you can have compatibility with other make and model
>>     of UPS.
>>
>>     With what driver it could start testing?
>>
>>     Greetings and thanks,
>>     Walter
>>
>>     (original Spanish text translated by Google)
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121124/fceda46e/attachment.html>