[Nut-upsuser] CyberPower DX600E won't switch up after power

[Franck]

On 2012-11-26 18:39, Arnaud Quette wrote:
> Hi Franck
>
> 2012/11/23 Franck <franck at secretfatty.net [3]>
>
>>> Subject: [Nut-upsuser] CyberPower DX600E wont switch up after
>>> power
>>>         is back
>>> Message-ID: <3c530815d1ea602efdfec0d67eb1e0b1 at secretfatty.net
>>> [1]>
>>> Content-Type: text/plain; charset=UTF-8; format=flowed
>>>
>>> Hello
>>> I have an issue with an CyberPower DX600E,
>>> it doesnt switch up when the power is back; after it has been
>>> unloaded;
>>> is it because of one of those variables ?
>>> regards
>>> Franck
>>>
>>> #upsc myups
>>> battery.charge: 100
>>> battery.charge.low: 10
>>> battery.charge.warning: 20
>>> battery.mfr.date: CPS
>>> battery.runtime: 1380
>>> battery.runtime.low: 300
>>> battery.type: PbAcid
>>> battery.voltage: 4.7
>>> battery.voltage.nominal: 12
>>> device.mfr: CPS
>>> device.model: DX600E
>>> device.type: ups
>>> driver.name [2]: usbhid-ups
>>> driver.parameter.pollfreq: 30
>>> driver.parameter.pollinterval: 2
>>> driver.parameter.port: auto
>>> driver.version: 2.4.3
>>> driver.version.data: CyberPower HID 0.3
>>> driver.version.internal: 0.34
>>> input.transfer.high: 0
>>> input.transfer.low: 0
>>> input.voltage: 230.0
>>> input.voltage.nominal: 230
>>> output.voltage: 238.0
>>> ups.beeper.status: enabled
>>> ups.delay.shutdown: 20
>>> ups.delay.start: 30
>>> ups.load: 31
>>> ups.mfr: CPS
>>> ups.model: DX600E
>>> ups.productid: 0501
>>> ups.realpower.nominal: 360
>>> ups.status: OL
>>> ups.timer.shutdown: -60
>>> ups.timer.start: 0
>>> ups.vendorid: 0764
>>
>> Am i suppose to run a "shutdown.return" command ?
>>
>> Does it make sense to do it in the script triggering (for example
>> when receiving "low battery" ?
>
> depending on your exact OS / distros, this should be handled by NUT
> initscripts and probably the halt one.
>  what is yours?
>

Thanks for your reply Arnaud;
I have a debian squeeze.