[Nut-upsuser] mge-utalk ESV8+ comm problem

[Ivo Karabojkov]

Dear Sirs,

I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like 
to use it to power FreeBSD 9.0-Rel server.
Of fortunately I have problem with recommended driver - mge-utalk, nut 
2.6.4 (installed from FreeBSD Ports).
I get messages:
Could not get multiplier table: using raw readings.
and
updateinfo: Cannot update system status

I saw similar thread on mailing list with no exact answer.

My ups.conf file reads:

  [mge]
        driver = mge-utalk
        port = /dev/cuau0
        desc = "Pulsar ESV"
        pollinterval = 20

I also attach zipped output from
mge-utalk -DDDDD -a mge

To verify my UPS, RS232 cable and computer COM port I installed Eaton 
Personal Solution Pack for Windows. It works very well with hte UPS.

Thanks in advance for your help!

Best wishes,
Ivo

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Output.tar.gz
Type: application/x-gzip
Size: 19329 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121008/0f35bf1a/attachment-0001.bin>