[Nut-upsuser] mge-utalk ESV8+ comm problem

Arnaud Quette aquette.dev at gmail.com
Sat Oct 13 17:08:02 UTC 2012

2012/10/8 Ivo Karabojkov <karabojkov at kit.bg>

> Dear Sirs,

Hi Ivo,

> I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to
> use it to power FreeBSD 9.0-Rel server.
> Of fortunately I have problem with recommended driver - mge-utalk, nut
> 2.6.4 (installed from FreeBSD Ports).
> I get messages:
> Could not get multiplier table: using raw readings.
> and
> updateinfo: Cannot update system status
> I saw similar thread on mailing list with no exact answer.
> My ups.conf file reads:
>  [mge]
>        driver = mge-utalk
>        port = /dev/cuau0
>        desc = "Pulsar ESV"
>        pollinterval = 20
> I also attach zipped output from
> mge-utalk -DDDDD -a mge
> To verify my UPS, RS232 cable and computer COM port I installed Eaton
> Personal Solution Pack for Windows. It works very well with hte UPS.
> Thanks in advance for your help!

I've a Debian bug report on which I need to get back for... 4 years :-/

the main issue is that I don't have access to UTalk devices anymore.
so would you be able to test patches and send me back outputs?

Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121013/fc425c14/attachment.html>

More information about the Nut-upsuser mailing list