[Nut-upsuser] mge-utalk ESV8+ comm problem

[Martin Loyer]

Sorry guys,

I'm leaving for 10 days tomorrow.

I let you know on my way back.

Martin

Le 24/10/12 23:10, Arnaud Quette a écrit :
>
> 2012/10/21 Ivo Karabojkov <karabojkov at kit.bg <mailto:karabojkov at kit.bg>>
>
>     Hi, Arnaud!
>
>
> Hi Ivo,
>
>     As my ESV8+ woprks now I produced two debug outputs - before and
>     after applying the patch.
>
>
> both outputs shows that everything is fine, which is not fully 
> satisfactory to me.
>
>     In the next few days I'll do my best to send outputs with Pulsar
>     ES11 and EL.
>     I remember with the original (non-patched) driver ES11 didn't work
>     well and driver issued messages "could not get multtiplier table,
>     using raw readings".
>
>
> I've seen your further post. the msg you mention is nothing but normal.
> what is (was) not is the behavior your unit had previously, and the 
> fact that the driver was not recovering.
> I suspect that it was in echo mode. i.e, the unit once only received a 
> single "Z"
>
> the patch can only improve the situation, since it's back near to the 
> previous implementation (at least for the ZZ), and more complying to 
> the UTalk spec (WRT timing).
>
> that said, I would still like to hear from Martin and his ESV8 (not a +).
>
> cheers,
> Arnaud
> -- 
> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
> Debian Developer - http://www.debian.org
> Free Software Developer - http://arnaud.quette.fr
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121025/d0997bbf/attachment.html>