[Nut-upsuser] NUT v2.6.4 with HP AF401A won't start

[Pratt Chris]

Hi Arnaud.

I think you’ve cracked it.  The following terminal output shows the package and also shows that when I start it from /usr/local/ups/bin it doesn’t crash.

[root at ups-monitor bin]# rpm -q nut
nut-2.6.4-1.el6.x86_64
[root at ups-monitor bin]# which upsdrvctl
/sbin/upsdrvctl
[root at ups-monitor bin]# pwd
/usr/local/ups/bin
[root at ups-monitor bin]# ./upsdrvctl start
Network UPS Tools - UPS driver controller 2.6.5
Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
Detected HP R12000/3UPS on host 192.168.0.89 (mib: cpqpower 1.5)
[UPS-HP01] snmp_ups_walk: data stale for ups.L1.realpower
[UPS-HP01] snmp_ups_walk: data stale for ups.L2.realpower
[UPS-HP01] snmp_ups_walk: data stale for ups.L3.realpower
[root at ups-monitor bin]#

I’ve uninstalled the package and re-run make install just to be sure and it starts up fine with upsdrvctl start, with the following message in /var/log/messages.
Oct 30 09:20:25 ups-monitor snmp-ups[32252]: Startup successful

Now it’s on to finishing the configuration and setting up the clients.

Many thanks for your help.

Regards,

Chris.


Chris Pratt
Development Infrastructure Manager
T: +44 118 929 4176 | M: +44 7979 854 307 | F: +44 118 929 4001

________________________________
Disclaimer: This message and any attachments thereto are intended solely for the addressed recipient(s) and may contain confidential information.
If you are not the intended recipient, please notify the sender by reply e-mail and delete the e-mail (including any attachments thereto) without producing, distributing or retaining any copies thereof. Any review, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient(s) is prohibited.
Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20121031/e3438c57/attachment.html>