[Nut-upsuser] CP1000PFCLCD really high output voltage

[jalano]

Hi!  I just installed a new CP1000PFCLCD (Cyber Power PFC Sinewave UPS) and everything appears to be working correctly, except that I have an oddly high output voltage reading from nut. All of the other values seem consistent with what the front-panel LCD says except for this one.

Is this something that needs a correction factor, or perhaps the value the driver is reading has been remapped?  BTW, the value has moved from a low of 136 to a high of 142.  So it seems to be measuring *something* that fluctuates!  :)

battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 2790
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 16.0
battery.voltage.nominal: 24
device.mfr: CP1000PFCLCD
device.model: CRDA103*AF1
device.serial: CPS
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.6.3
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.35
input.transfer.high: 139
input.transfer.low: 88
input.voltage: 119.0
input.voltage.nominal: 120

Really high --> output.voltage: 136.0

ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 12
ups.mfr: CP1000PFCLCD
ups.model: CRDA103*AF1
ups.productid: 0501
ups.realpower.nominal: 600
ups.serial: CPS
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764