[Nut-upsuser] can't find UPS on openwrt/arm

[Matus UHLAR - fantomas]

>>> On Apr 5, 2013, at 3:04 AM, Matus UHLAR - fantomas wrote:
>>>> libusb: 0.000000 error [get_config_descriptor] short output read 0/8

>> On 05.04.13 20:39, Charles Lepple wrote:
>>> Reading the config descriptor is a pretty basic operation. What does "lsusb
>>> -vvv -d 0463:ffff" return?

>On Apr 6, 2013, at 10:08 AM, Matus UHLAR - fantomas wrote:
>> http://test.fantomas.sk/tplink2543nd_lsusb-vvv-d_0463:ffff

On 06.04.13 10:20, Charles Lepple wrote:
>Hmm, perhaps Arnaud can ask someone what the other five configurations are:
>
>  idVendor           0x0463 MGE UPS Systems
>  idProduct          0xffff UPS
>  bcdDevice            1.00
>  iManufacturer           1 EATON
>  iProduct                2 Protection Station
>  iSerial                 4 AN2E49008
>  bNumConfigurations      6
>
>Is there any way you can build against the real libusb-0.1, versus the
> compatibility layer from 1.0?  They may have different error checking
> strategies when reading descriptors.

as seen on my home PC: http://test.fantomas.sk/pc_lsusb-vvv-d_0463:ffff
I will try to get output on my home NAS (ARM architecture)
-- 
Matus UHLAR - fantomas, uhlar at fantomas.sk ; http://www.fantomas.sk/
Warning: I wish NOT to receive e-mail advertising to this address.
Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu.
The 3 biggets disasters: Hiroshima 45, Tschernobyl 86, Windows 95