[Nut-upsuser] HP R1500 G3 UPS does not accept battery.charge.low value via upsrw

[Jan Phillip Greimann]

Some more information:

The variables ups.delay.shutdown and ups.delay.start do change when set 
via upsrw.
The values of the variables battery.charge.low, input.transfer.high and 
input.transfer.low do not change with upsrw.

Regards,
Jan

Am 23.08.2013 15:50, schrieb Jan Phillip Greimann:
> Hi there,
>
> my HP R1500 G3 UPS doesn't apply my battery.charge.low value
> i set via upsrw.
>
> Is this a common problem with this model in nut 2.6.4?
>
> Any ideas how to force the UPS to accept this value?
>
> Regards
> Jan
>
> % upsc hp1500
> battery.charge: 100
> battery.charge.low: 20
> battery.charge.warning: 20
> battery.runtime: 23917
> battery.temperature: 49.0
> battery.type: PbAc
> battery.voltage: 39.0
> battery.voltage.nominal: 36.0
> device.mfr: Hewlett-Packard
> device.model: HP R1500 G3 UPS
> device.part: AF471A
> device.serial: XXXXXXXXXX
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.6.4
> driver.version.data: TrippLite HID 0.8
> driver.version.internal: 0.37
> input.frequency: 50.0
> input.transfer.high: 266.0
> input.transfer.low: 194.0
> input.voltage: 232.0
> input.voltage.nominal: 230
> output.current: 0.00
> output.frequency: 50.0
> output.frequency.nominal: 50
> output.voltage: 231.0
> output.voltage.nominal: 230
> ups.beeper.status: enabled
> ups.delay.shutdown: 20
> ups.delay.start: 30
> ups.firmware: 264
> ups.load: 0
> ups.load.nominal: 80
> ups.mfr: Hewlett-Packard
> ups.model: HP R1500 G3 UPS
> ups.power: 0.0
> ups.power.nominal: 1500
> ups.productid: 1fe0
> ups.serial: XXXXXXXXXX
> ups.status: OL CHRG
> ups.test.result: No test initiated
> ups.timer.reboot: -1
> ups.timer.shutdown: -1
> ups.timer.start: -1
> ups.vendorid: 03f0
>
> % upsc hp1500 server.version
> 2.6.4
>
> % upsrw hp1500
> [battery.charge.low]
> Remaining battery level when UPS switches to LB (percent)
> Type: STRING
> Value: 20
>
> [input.transfer.high]
> High voltage transfer point (V)
> Type: STRING
> Value: 266.0
>
> [input.transfer.low]
> Low voltage transfer point (V)
> Type: STRING
> Value: 194.0
>
> [ups.delay.shutdown]
> Interval to wait after shutdown with delay command (seconds)
> Type: STRING
> Value: 20
>
> [ups.delay.start]
> Interval to wait before (re)starting the load (seconds)
> Type: STRING
> Value: 30
>
>
> % upsrw -s battery.charge.low=30 hp1500
> Username (root): admin
> Password:
> OK
>
> % upsrw hp1500
> [battery.charge.low]
> Remaining battery level when UPS switches to LB (percent)
> Type: STRING
> Value: 20
>
> [...]
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>