[Nut-upsuser] Installing NUT for PowerWalker VI 1500 LCD

[Charles Lepple]

On Dec 3, 2013, at 12:06 PM, Danijel Šili wrote:

> OK, but since I moved the cable around its now 3/2:
> 
> crw-rw-r-- 1 root nut 189, 257 Dec  3 18:04 /dev/bus/usb/003/002

... which is what the MODE=664 udev rule set.

Is there by chance some other udev rule which might match your ups? (There are a number of devices out there which use Cypress chips - maybe another package changed the permissions as well.)

> On Tue, Dec 3, 2013 at 1:54 PM, Charles Lepple <clepple at gmail.com> wrote:
>> On Dec 3, 2013, at 1:10 AM, Danijel Šili wrote:
>> 
>>> On Tue, Dec 3, 2013 at 2:52 AM, Charles Lepple <clepple at gmail.com> wrote:
>>>> On Dec 2, 2013, at 11:01 AM, Danijel Šili wrote:
>>>> 
>>>>> Since the permission change helped, I can now continue with the
>>>>> configuration. Thanks for the help :)
>>>> 
>>>> What are the final permissions?
>>> 
>>> Don't know which permissions are being checked. Can you tell me where
>>> to check the permissions?
>> 
>> 
>> Using the output of lsusb, such as your example before:
>> 
>>> Bus 004 Device 006: ID 0665:5161 Cypress Semiconductor USB to Serial
>> 
>> ls -l /dev/bus/usb/004/006
>> 
>> --
>> Charles Lepple
>> clepple at gmail
>> 
>> 
>>