[Nut-upsuser] AtlantisLand don't want to wake up after the whiteout

[Fabio Cecamore]

Hi all,
I've problem with the management of my AtlantisLand UPS, the UPS don't 
want to wake up after the whiteout and I don't have any idea why..
This is the ups.conf:

[ups]
driver = blazer_usb
subdriver = cypress
vendorid = 0665
productid = 5161
port = auto
desc = "AtlantisLand Host Power 851+"
pollinterval = 10
offdelay = 60


this is the upsc result:

battery.charge: 100
battery.voltage: 13.50
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.type: ups
driver.name: blazer_usb
driver.parameter.offdelay: 60
driver.parameter.pollinterval: 10
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.subdriver: cypress
driver.parameter.vendorid: 0665
driver.version: 2.6.5
driver.version.internal: 0.09
input.current.nominal: 3.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 232.8
input.voltage.fault: 232.8
input.voltage.nominal: 220
output.voltage: 232.8
ups.beeper.status: enabled
ups.delay.shutdown: 60
ups.delay.start: 180
ups.load: 8
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665

I had the same problem with the old UPS (serial), never wake up.. So I 
think is my bad configuration.
Thanks all..

Bye
Fabio