[Nut-upsuser] AtlantisLand don't want to wake up after the whiteout

[hyouko at gmail.com]

2013/12/9 Fabio Cecamore <ceca_89 at hotmail.com>:
> and the UPS don't wake up after the whiteout..

2013/12/6 Fabio Cecamore <ceca_89 at hotmail.com>:
> desc = "AtlantisLand Host Power 851+"

Is your UPS an 'Atlantis Land Host Power 851' or an 'Atlantis Land One
Power 841+'?

The first one should be using a slighty modified version of the 'QS'
('mustek' in NUT) protocol: Roberto Martelli has done a lot of testing
with it for me as we are trying to improve the support for it in NUT
and his UPS seems to wake up after the witheout, he has problems that
seem to be related to a specific sequence of commands, but I don't
think that's the case with you.

The 841+: as it comes with ViewPower, I suppose it's manufactured by
Voltronic Power; if that is the case *and* your unit is using their
'QGS' ('voltronic' in NUT) protocol, maybe the UPS has the 'Auto
Reboot' (in Voltronic Power's ViewPower) option disabled or
'ups.delay.start' (in NUT, using the new nutdrv_qx driver with
protocol=voltronic) option set to 'no'.

Can you please launch the driver with a debug level = 3 and provide some logs?

blazer_usb -DDD -a <name_of_the_ups>

i.e., going by the ups.conf of your mail:

blazer_usb -DDD -a ups

This way we can at least see if it's using a Q1 or a QS protocol.