[Nut-upsuser] AtlantisLand don't want to wake up after the whiteout

[Fabio Cecamore]

> Is your UPS an 'Atlantis Land Host Power 851' or an 'Atlantis Land One
> Power 841+'?

My fault, it is the 841+ . --> 
http://www.atlantisland.it/pub/prodotti.php?famiglia=1&l1=7&l2=24&articolo=QTAzLVA4NDE=

> Can you please launch the driver with a debug level = 3 and provide some logs?
>
> blazer_usb -DDD -a <name_of_the_ups>

http://pastebin.com/m5RAW57N



Il 09/12/2013 16.52, hyouko at gmail.com ha scritto:
> 2013/12/9 Fabio Cecamore <ceca_89 at hotmail.com>:
>> and the UPS don't wake up after the whiteout..
> 2013/12/6 Fabio Cecamore <ceca_89 at hotmail.com>:
>> desc = "AtlantisLand Host Power 851+"
> Is your UPS an 'Atlantis Land Host Power 851' or an 'Atlantis Land One
> Power 841+'?
>
> The first one should be using a slighty modified version of the 'QS'
> ('mustek' in NUT) protocol: Roberto Martelli has done a lot of testing
> with it for me as we are trying to improve the support for it in NUT
> and his UPS seems to wake up after the witheout, he has problems that
> seem to be related to a specific sequence of commands, but I don't
> think that's the case with you.
>
> The 841+: as it comes with ViewPower, I suppose it's manufactured by
> Voltronic Power; if that is the case *and* your unit is using their
> 'QGS' ('voltronic' in NUT) protocol, maybe the UPS has the 'Auto
> Reboot' (in Voltronic Power's ViewPower) option disabled or
> 'ups.delay.start' (in NUT, using the new nutdrv_qx driver with
> protocol=voltronic) option set to 'no'.
>
> Can you please launch the driver with a debug level = 3 and provide some logs?
>
> blazer_usb -DDD -a <name_of_the_ups>
>
> i.e., going by the ups.conf of your mail:
>
> blazer_usb -DDD -a ups
>
> This way we can at least see if it's using a Q1 or a QS protocol.