[Nut-upsuser] Hope for APC Smart UPS 1500

[Gregor Burck]

Hi,

we bought two Smart-UPS X 1500 FW:UPS 09.1 / ID=20
lsusb -v:


Bus 002 Device 002: ID 051d:0003 American Power Conversion UPS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x051d American Power Conversion
  idProduct          0x0003 UPS
  bcdDevice            1.06
  iManufacturer           1 American Power Conversion 
  iProduct                2 Smart-UPS X 1500 FW:UPS 09.1 / ID=20
  iSerial                 3 AS1301212410  
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode           33 US
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     515
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              20
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              10
Device Status:     0x0002
  (Bus Powered)
  Remote Wakeup Enabled


I see there should be problems to get it work with a free daemon like nut, but are there some hints using it?
In my ups.conf I tried:

[apc001]
        driver = apcsmart
        port = auto
        desc = "Smart APC"


And I get broadcast messages when I connect/disconnect the device like:
Broadcast Message from root at glus  
        (somewhere) at 14:24 ...                                               
                                                                               
Communications restored with UPS glustersv001 

(glustersv001 is the machine I connect it to)

Thank you for support,

Gregor
--