[Nut-upsuser] AP9630 AES Support

Charles Lepple clepple at gmail.com
Fri Apr 4 02:57:28 UTC 2014

On Mar 30, 2014, at 10:39 PM, Shade Alabsa wrote:

> Hello again! Your suggestions the other day did work so thank you! I do have one more question for you guys though. APC AP9630 SNMP monitoring card is listed in the HCL and next to it there is privProtocol = AES. Does this mean only AES works or AES doesn't work? I saw the archived mailing lists were it looked like it only worked with the AES protocol, though in my set up it works with everything else but AES. Just want to verify which one is correct. Thanks!

We rely on mailing list reports for the SNMP side of things. Typically, the HCL lists parameters which are needed to make things work. However, if it turns out to be an issue elsewhere (such as a bug in that version of the net-snmp library), we won't necessarily know unless someone else works through all of the possibilities.

So that we have it all in one place: you're using an APC9630 card with which version of NUT, which firmware version on the card, and which version of net-snmp?

Charles Lepple
clepple at gmail

More information about the Nut-upsuser mailing list