[Nut-upsuser] New Tripplite UPS: INTERNET350U
clepple at gmail.com
Sat Jul 5 19:32:24 UTC 2014
On Jun 21, 2014, at 10:21 AM, Bossard <ebossard at gmail.com> wrote:
> On Sun, Jun 15, 2014 at 10:19 AM, Charles Lepple <clepple at gmail.com> wrote:
>> usbhid-ups -u root -x productid=2010 -DD -a <UPS-name>
> Hello Charles,
> Sorry it took me so long to post:
> (The output of:) /lib/nut/usbhid-ups -u root -x productid=2010 -DD -a tripplite
> Network UPS Tools - Generic HID driver 0.34 (2.4.3)
> USB communication driver 0.31
> 0.000000 debug level is '2'
> 0.000700 upsdrv_initups...
> 0.130746 Checking device (1D6B/0001) (005/001)
> 0.130824 - VendorID: 1d6b
> 0.130836 - ProductID: 0001
> 0.130845 - Manufacturer: Linux 2.6.32-5-686 uhci_hcd
^ What Linux distribution are you running?
> 0.148284 Checking device (09AE/2010) (002/113)
> 0.181081 - VendorID: 09ae
> 0.181104 - ProductID: 2010
> 0.181114 - Manufacturer: Tripp Lite
> 0.181124 - Product: Tripp Lite UPS
> 0.181135 - Serial Number: unknown
> 0.181145 - Bus: 002
> 0.181154 Trying to match device
> 0.181242 Device does not match - skipping
I really don't see how this could happen when specifying that productid option.
I don't remember any recent bug fixes that could cause things to work differently if you add "productid=2010" to the ups.conf file, but that was reported to work with 2.4.3 in this email:
That email also confirms that the 2010 productid does, in fact, work out-of-the-box with 2.6.0.
Other than trying the ups.conf route, I would recommend getting a newer version of NUT (this version is over four years old), either through your distribution's "backports" system, or by building from source. Again, since you haven't mentioned what system you are running, I don't have any more specific recommendations than that.
clepple at gmail
More information about the Nut-upsuser