[Nut-upsuser] About your driver NUTDRV_ATCL_USB(8) for install

[pererivers at yahoo.es]

Dear Chales,

Thanks for your quick reply.
I have Raspberry with last Kernel [Linux pi1 3.18.6+ #753 PREEMPT Sun Feb 8
14:47:22 GMT 2015 armv6l GNU/Linux]
If <upsdrvctl>, <upsd> and <upsmon> are stopped <nutdrv_atcl_usb> Works well
without any error as "Device or resource busy".
If I run <upsc> command never receive any value from my ups     <upsc
ups at localhost>  then I can't test shutdown ups.

When I run <upsd>  with debugin level I view change of my UPS VALUES (OL) to
(OB) when I cut its power.
When I run <upsmon>  each 5 minuts I received "NOTIFYFLAG NOCOMM" in monitor
and by email but never receive other notify.

Broadcast Message from root at pi1

        (somewhere) at 19:58 ...                  
UPS myups at 192.168.1.7 is unavailable  


My  <Upsmon.conf>  is:

NOTIFYCMD /usr/local/ups/bin/nut-notify  <---- script file to send me email.
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC
NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC
NOTIFYFLAG COMMOK SYSLOG+WALL+EXEC
NOTIFYFLAG COMMBAD SYSLOG+WALL+EXEC
NOTIFYFLAG SHUTDOWN SYSLOG+WALL+EXEC
NOTIFYFLAG REPLBATT SYSLOG+WALL+EXEC
NOTIFYFLAG NOCOMM SYSLOG+WALL+EXEC
NOTIFYFLAG FSD SYSLOG+WALL+EXEC
MONITOR myups at 192.168.1.7 1 monuser root master
----------------------------------------------------------------------------

Upsd.users
[monuser]
  password = root
  upsmon master

upsd.conf
LISTEN 192.168.1.7 3493   <--- if i put LISTEN 127.0.0.1 don't work/ and
with localhost don't work.


Are nutdrv_atcl_usb driver experimental driver with limitations about send
ONBATT,ONLINE, etc...?

Best regards,
Pere



-----Mensaje original-----
De: Charles Lepple [mailto:clepple at gmail.com] 
Enviado el: lunes, 9 de febrero de 2015 14:57
Para: PERE (yahoo.es)
CC: NUT List
Asunto: Re: [Nut-upsuser] About your driver NUTDRV_ATCL_USB(8) for install

On Feb 9, 2015, at 6:48 AM, PERE (yahoo.es) <pererivers at yahoo.es> wrote:

>   0.028188     Can't set USB configuration: could not set config 1: Device
or resource busy
>   0.029246     detached kernel driver from USB device...
>   0.030559     USB device [0001:0000] opened
>   0.866216     read: (8 bytes) => 03 00 00 00 00 00 00 00
>   0.866413     reply[0] = 0x03 -> OL
>   0.867461     dstate_init: sock /var/state/ups/nutdrv_atcl_usb-ups open
on fd 5
>   1.914346     read: (8 bytes) => 03 00 00 00 00 00 00 00
>   1.915850     reply[0] = 0x03 -> OL
>   5.872047     status interrupt read: error submitting URB: Device or
resource busy

"Device or resource busy" usually means that another kernel driver or
userspace program is accessing the same device. Check for another copy of
nutdrv_atcl_usb.

Which Raspberry Pi distribution are you using, and what is the kernel
version?

-- 
Charles Lepple
clepple at gmail




---
Aquest correu electrònic s'ha verificat mitjançant l'Avast antivirus.
http://www.avast.com