[Nut-upsuser] Problem installing NUT on 16.04
tadawson at tpcsvc.com
Sat Dec 3 17:46:04 UTC 2016
Looks like you did - "OL" is shorthand for "On Line"
On December 3, 2016 11:31:46 AM CST, Jack McGee <jack at greendesk.net> wrote:
>On 12/03/2016 10:55 AM, Jack McGee wrote:
>> On 12/03/2016 10:35 AM, Charles Lepple wrote:
>>> On Dec 3, 2016, at 11:16 AM, Jack McGee <jack at greendesk.net> wrote:
>>>> Dec 3 08:38:16 amethi upsd: not listening on ::1 port 3493
>>>> Dec 3 08:38:16 amethi upsd: listening on 127.0.0.1 port
>>>> Dec 3 08:38:16 amethi upsd: no listening interface
>>> I can't say I fully understand the logic behind the IPv6 code, but
>>> the first line indicates a problem binding to the IPv6 localhost
>>> address. The "LISTEN 127.0.0.1 3493" line in upsd.conf is sufficient
>>> for local control and monitoring, and you can remove "LISTEN ::1
>> OK, did that restarted services and:
>> mythuser at amethi:/etc/nut$ upscmd -l CyberUPS1
>> Instant commands supported on UPS [CyberUPS1]:
>> beeper.disable - Disable the UPS beeper
>> beeper.enable - Enable the UPS beeper
>> beeper.mute - Temporarily mute the UPS beeper
>> beeper.off - Obsolete (use beeper.disable or beeper.mute)
>> beeper.on - Obsolete (use beeper.enable)
>> load.off - Turn off the load immediately
>> load.off.delay - Turn off the load with a delay (seconds)
>> load.on - Turn on the load immediately
>> load.on.delay - Turn on the load with a delay (seconds)
>> shutdown.return - Turn off the load and return when power is back
>> shutdown.stayoff - Turn off the load and remain off
>> shutdown.stop - Stop a shutdown in progress
>> test.battery.start.deep - Start a deep battery test
>> test.battery.start.quick - Start a quick battery test
>> test.battery.stop - Stop the battery test
>> so this is progress. Thanks! Anything else to check to know it is
>> working as it should?
>> My next step will be to point NUT client on another machine to this
>> one. They are both plugged into this UPS.
>Maybe still a problem:
>mythuser at amethi:/etc/nut$ sudo upsc CyberUPS1 at localhost ups.status
>[sudo] password for mythuser:
>Init SSL without certificate database
>But if I read this
>correctly, it is just a warning?
>But shouldn't I see a status?
>Nut-upsuser mailing list
>Nut-upsuser at lists.alioth.debian.org
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser