[Nut-upsuser] setting up CYBERPOWER CP1500PFCLCD

[Charles Lepple]

[please use reply-all to include the list - the headers are not mangled]

On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzień wrote:
> 
> Hi,
> 
> Another beginner question. I spend hours trying to find the solution for how to configure winnut properly but I' struggling to make it work. I want my QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down during power outage. I configured QNAP properly (like this: http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what to do next.
> 
> I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD 
> I have no idea how to config monitoring. This part: MONITOR <system> <powervalue> <username> <password> ("master"|"slave")
> 
> I found somewhere that I should add a line:
> MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456 slave
> 
Does this help? http://www.snbforums.com/threads/using-qnap-ups-server-to-signal-other-devices.17551/

It mentions that you should use the Admin password for QNAP.

Also, just to clarify, it sounds like <IP ADDRESS OF MY COMPUTER> should be the IP of the QNAS unit, not the computer running WinNUT.