[Nut-upsuser] Compaq R3000h support

[Tomas Larsson]

Now I have some access problems.
This is what ends up un messages
Hosts.allow is set to accept anyone on the local net.
Username and passwords are the same
Upsc gives proper output.
System is Centos 6.8

Jul 22 17:20:06 BIFROST upscode2[10113]: Startup successful
Jul 22 17:20:06 BIFROST upsd[10116]: listening on ::1 port 3493
Jul 22 17:20:06 BIFROST upsd[10116]: listening on 192.168.0.1 port 3493
Jul 22 17:20:06 BIFROST upsd[10116]: listening on 127.0.0.1 port 3493
Jul 22 17:20:06 BIFROST upsd[10116]: Connected to UPS [R3000]: upscode2-R3000
Jul 22 17:20:06 BIFROST upsd[10117]: Startup successful
Jul 22 17:20:06 BIFROST upsmon[10121]: Startup successful
Jul 22 17:20:06 BIFROST upsmon[10122]: Login on UPS [R3000 at localhost] failed - got [ERR ACCESS-DENIED]

With best regards

[Beskrivning: ENRAD_logo_20K.bmp]
Tomas Larsson
CTO
Enrad AB
Verkstadsgatan 10
504 62 Borås
Office: +46 33 297 550
Direct: +46 33 297 553

www.enrad.se<http://www.enrad.se/>
https://youtu.be/Dq9duakIjMU
Enrad AB ingår i Cleantech inn. Kluster för hållbar global utveckling
[Beskrivning: Clean Tech Inn]<http://cleantechinn.se/>
This e-mail message is confidential intended only for use of the
addressees. If you have received this e-mail in error, please notify us
immediately and delete it thereafter from your system. Any dissemination,
distribution or copying of this e-mail is strictly prohibited.

P  Tänk på miljön innan du skriver ut.
[cid:image003.jpg at 01D30310.A4A62BB0]

Från: Larry Fahnoe [mailto:fahnoe at fahnoetech.com]
Skickat: den 22 juli 2017 15:10
Till: Charles Lepple
Kopia: Tomas Larsson; nut-upsuser at lists.alioth.debian.org
Ämne: Re: [Nut-upsuser] Compaq R3000h support

On Sat, Jul 22, 2017 at 7:48 AM, Charles Lepple <clepple at gmail.com<mailto:clepple at gmail.com>> wrote:

I also have not used a Synology device, but as I recall, they generally expect to be the NUT master system. This may cause problems if you need to do something fancy with upssched.

The Synology  boxes work fine as NUT clients, *however* they provide very little ability to configure NUT options. Specifically, the UPS name, username and password are all hard-coded (at least on DSM 6.x last time I looked at it), so the main NUT configuration on the NUT master must use these values for slaves:
UPS - ups
Username - monuser
Password - secret

Therefore protect the NUT network segment appropriately.

--Larry

--
Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com<mailto:fahnoe at FahnoeTech.com>
           Minneapolis, Minnesota       www.FahnoeTech.com<http://www.FahnoeTech.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170722/9d0eeefe/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 2725 bytes
Desc: image001.png
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170722/9d0eeefe/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1427 bytes
Desc: image002.jpg
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170722/9d0eeefe/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 10122 bytes
Desc: image003.jpg
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170722/9d0eeefe/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tomas Larsson.vcf
Type: text/x-vcard
Size: 24120 bytes
Desc: Tomas Larsson.vcf
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170722/9d0eeefe/attachment-0001.vcf>