[Nut-upsuser] Help with Elite 800VA usb UPS
Andrea de Lutti
adelutti at gmail.com
Thu Jun 8 13:15:35 UTC 2017
Thank you for your reply Charles,
this is the "upsc" result:
root at artu:~# upsc ups at localhost
Init SSL without certificate database
Error: Unknown UPS
Trying with nutdrv_qx, protocol megatec the driver does not start...
2017-06-08 14:47 GMT+02:00 Charles Lepple <clepple at gmail.com>:
> On Jun 7, 2017, at 12:54 AM, Andrea de Lutti <adelutti at gmail.com> wrote:
> > Hi, I have tried several drivers for make my Elite UPS working.
> > With blazer_usb I can contact it, but I have no informations. This is
> the best result.
> > OS: Ubuntu Xenial 16.04.2 LTS
> > NUT Version: Nut 2.7.2-4Ubuntu1 (Installed from Ubuntu Software Center)
> > Device name: Elite UPS 800VA (http://www.elit-ups.com/ita/pro_ups.html,
> discontinued) I can provider their *not working* linux monitoring tool
> > Here is the result from starting upsdrvctl
> > root at artu:~# upsdrvctl start
> > Network UPS Tools - UPS driver controller 2.7.2
> > Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
> > Supported UPS detected with megatec protocol
> > Rating information unavailable
> > Vendor information unavailable
> > No values provided for battery high/low voltages in ups.conf
> > Using 'guestimation' (low: -0.866667, high: -1.083333)!
> > Battery runtime will not be calculated (runtimecal not set)
> What does "upsc" show for this UPS?
> Note that the blazer_usb driver is no longer maintained. Its replacement
> is nutdrv_qx:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser