[Nut-upsuser] nut-server service fails to start at boot

[Manuel Wolfshant]

On 10/22/2017 09:39 AM, Daniel Shields wrote:
>
> Hello,
>
>      I have a Raspberry Pi model B running Raspbian Stretch.  I have 
> installed version 2.7.4-5 of nut from the raspbian repos.  I have a 
> CyberPower 1500PFCLCD UPS. When I reboot the Pi, the nut-server 
> service fails to start.
>
> root at nut:~# service nut-server status
>
> ● nut-server.service - Network UPS Tools - power devices information 
> server
>
>    Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; 
> vendor preset: enabled)
>
>    Active: failed (Result: exit-code) since Sun 2017-10-22 05:57:37 
> UTC; 5min ago
>
>   Process: 341 ExecStart=/sbin/upsd (code=exited, status=1/FAILURE)
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: fopen /var/run/nut/upsd.pid: 
> No such file or directory
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: not listening on 
> 192.168.213.189 port 3493
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: not listening on 
> 192.168.213.189 port 3493
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: listening on 127.0.0.1 port 3493
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: no listening interface available
>
> Oct 22 05:57:37 nut.tklapp.com upsd[341]: Network UPS Tools upsd 2.7.4
>
> Oct 22 05:57:37 nut.tklapp.com systemd[1]: nut-server.service: Control 
> process exited, code=exited status=1
>
> Oct 22 05:57:37 nut.tklapp.com systemd[1]: Failed to start Network UPS 
> Tools - power devices information server.
>
> Oct 22 05:57:37 nut.tklapp.com systemd[1]: nut-server.service: Unit 
> entered failed state.
>
> Oct 22 05:57:37 nut.tklapp.com systemd[1]: nut-server.service: Failed 
> with result 'exit-code'.
>
> root at nut:~#
>
> I have looked through the syslogs, but have not been able to find 
> anything obvious.
>
> I have attached an excerpt from the syslog from when the server is 
> rebooted and the nut-server service fails.  Any help or advice is 
> greatly appreciated.  Thanks!
>

Can you please try replacing "after=network.target" with 
"after=network-online.target" ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20171022/789431c4/attachment.html>