[Nut-upsuser] TrippLite SMX1500LCDT FreeBSD 11.2 trouble

[Charles Lepple]

On Aug 19, 2018, at 3:03 PM, Valentin Merkulov <schnobel at ickis.net> wrote:
> 
> Here is what I get:
> 
> # usbconfig -u 1 -a 3 dump_curr_config_desc
> ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW
> (1.5Mbps) pwr=ON (100mA)
> 
[...]

Hmm, that may be an issue on the NUT side, then. (You might see issues if you run those commands repeatedly, though.)

We are working on another branch that uses the newer libusb-1.0 APIs. I haven't had to modify a ports tree package in a while, but it should be possible to substitute one of our snapshots from that branch. You can grab a tarball from here:

http://buildbot.networkupstools.org/~buildbot/docker-debian-jessie/snapshot/libusb-compat-1.0/rb14c3b4fe2540a6b4181918fb89678b68733a814-887/nut-v2.7.4-603-gb14c3b42.7.4.1.tar.gz

and use that instead of the official NUT 2.7.4 tarball.

SHA256(nut-v2.7.4-603-gb14c3b42.7.4.1.tar.gz)= 4d67212669d777961f5a0c9215f1853004997cf225abeba3360453439390c6bd

Some history of that branch (and other related branches) here: https://github.com/networkupstools/nut/issues/300