[Nut-upsuser] TrippLite SMX1500LCDT FreeBSD 11.2 trouble

[Valentin Merkulov]

OK, from this build I get the following:

# /usr/local/ups/bin/usbhid-ups -a ups -DDDD
Network UPS Tools - Generic HID driver 0.53 (v2.7.4-603-gb14c3b42.7.4.1)
USB communication driver 0.37
   0.000000     [D1] debug level is '4'
   0.001299     [D1] upsdrv_initups...
   0.001450     [D2] nut_libusb_open: checking device 1 of 1.
   0.033333     [D2] nut_libusb_open: - VendorID: 09ae.
   0.033345     [D2] nut_libusb_open: - ProductID: 3016.
   0.033350     [D2] nut_libusb_open: - Manufacturer: Tripp Lite.
   0.033353     [D2] nut_libusb_open: - Product: TRIPP LITE UPS.
   0.033357     [D2] nut_libusb_open: - Serial Number: unknown.
   0.033361     [D2] nut_libusb_open: - Bus: 001.
   0.033365     [D2] nut_libusb_open: - Device release number: 0002.
   0.033368     [D2] nut_libusb_open: trying to match device...
   0.033386     [D2] nut_libusb_open: device matches.
   0.033399     [D3] nut_usb_claim_interface:
libusb_kernel_driver_active() returned 1 (driver active).
   0.033404     [D3] nut_usb_claim_interface: successfully set kernel
driver auto-detach flag.
   0.033412     [D3] nut_usb_claim_interface: failed to claim USB
device (Other error).
   0.033417     [D3] nut_usb_claim_interface: failed to detach kernel
driver from USB device (Other error).
   0.033422     [D3] nut_usb_claim_interface: failed to claim USB
device (Other error).
   0.033430     [D3] nut_usb_claim_interface: failed to detach kernel
driver from USB device (Other error).
   0.033434     [D3] nut_usb_claim_interface: failed to claim USB
device (Other error).
   0.033438     [D3] nut_usb_claim_interface: failed to detach kernel
driver from USB device (Other error).
   0.033443     [D3] nut_usb_claim_interface: failed to claim USB
device (Other error).
   0.033448     Can't claim USB device 09ae:3016 (Other error).
   0.033456     [D1] upsdrv_cleanup...

On Mon, Aug 20, 2018 at 4:33 AM, Charles Lepple <clepple at gmail.com> wrote:
> On Aug 19, 2018, at 3:03 PM, Valentin Merkulov <schnobel at ickis.net> wrote:
>>
>> Here is what I get:
>>
>> # usbconfig -u 1 -a 3 dump_curr_config_desc
>> ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW
>> (1.5Mbps) pwr=ON (100mA)
>>
> [...]
>
> Hmm, that may be an issue on the NUT side, then. (You might see issues if you run those commands repeatedly, though.)
>
> We are working on another branch that uses the newer libusb-1.0 APIs. I haven't had to modify a ports tree package in a while, but it should be possible to substitute one of our snapshots from that branch. You can grab a tarball from here:
>
> http://buildbot.networkupstools.org/~buildbot/docker-debian-jessie/snapshot/libusb-compat-1.0/rb14c3b4fe2540a6b4181918fb89678b68733a814-887/nut-v2.7.4-603-gb14c3b42.7.4.1.tar.gz
>
> and use that instead of the official NUT 2.7.4 tarball.
>
> SHA256(nut-v2.7.4-603-gb14c3b42.7.4.1.tar.gz)= 4d67212669d777961f5a0c9215f1853004997cf225abeba3360453439390c6bd
>
> Some history of that branch (and other related branches) here: https://github.com/networkupstools/nut/issues/300