[Nut-upsuser] NUT reporting wrong voltage

[Crispin Proctor]

Hi folks,


I have an APC Back-UPS XS 1400U which is reporting the wrong input and
output voltages.
I am in the UK where our nominal voltage is 240 - not 110 :)

If I connect with parachute via USB it reports correctly.

Is there a config I can update to tell it what it should be reporting? Some
wrong conversion?
TIA


Some details:
pi at rpiserver01:~ $ upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2001/09/25
battery.mfr.date: 2015/05/10
battery.runtime: 14548
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.3
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Back-UPS XS 1400U
device.serial: 3B1519X22971
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: APC HID 0.96
driver.version.internal: 0.41
input.sensitivity: medium
input.transfer.high: 280
input.transfer.low: 155
input.transfer.reason: input voltage out of range
input.voltage: 110.0
input.voltage.nominal: 102
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: 926.T1 .I
ups.firmware.aux: T1
ups.load: 0
ups.mfr: American Power Conversion
ups.mfr.date: 2015/05/10
ups.model: Back-UPS XS 1400U
ups.productid: 0002
ups.realpower.nominal: 700
ups.serial: 3B1519X22971
ups.status: OL
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20181205/2c2e62a9/attachment.html>