[Nut-upsuser] Tripp Lite SU5000RT3U

[Michael]

Hi,

I am trying to configure my Tripp Lite SU5000RT3U on Ubuntu 18.04 as I am
not able to completely get all the data from the UPS. After installing all
required packages from the Ubuntu repos (had to run  sudo apt-get install
dkms, I had to install the displaylink drivers from displaylink.org by
doing sudo ./displaylink-driver-4.2.29.run, and I created a sim link by
doing the following: sudo ln -s
/usr/src/linux-headers-4.15.0-20-generic/include/generated/autoconf.h
/usr/src/linux-headers-4.15.0-20-generic/include/linux/) and butchering a
NUT configuration, I get the following output (after running upsc
Tripp-Lite at localhost):

Init SSL without certificate database
battery.voltage.nominal: 48
device.mfr: Tripp Lite
device.model: TRIPP LITE UPS
device.type: ups
driver.name: tripplite_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 0.29
input.voltage.nominal: 208
outlet.1.desc: Load 1
outlet.1.id: 1
outlet.1.switch: 1
outlet.1.switchable: 1
outlet.2.desc: Load 2
outlet.2.id: 2
outlet.2.switch: 1
outlet.2.switchable: 1
outlet.3.desc: Load 3
outlet.3.id: 3
outlet.3.switch: 1
outlet.3.switchable: 1
outlet.4.desc: Load 4
outlet.4.id: 4
outlet.4.switch: 1
outlet.4.switchable: 1
outlet.5.desc: Load 5
outlet.5.id: 5
outlet.5.switch: 1
outlet.5.switchable: 1
outlet.6.desc: Load 6
outlet.6.id: 6
outlet.6.switch: 1
outlet.6.switchable: 1
outlet.7.desc: Load 7
outlet.7.id: 7
outlet.7.switch: 1
outlet.7.switchable: 1
outlet.8.desc: Load 8
outlet.8.id: 8
outlet.8.switch: 1
outlet.8.switchable: 1
outlet.9.desc: Load 9
outlet.9.id: 9
outlet.9.switchable: 0
ups.debug.0: 00 05 58 58 58 58 0d '..XXXX.'
ups.debug.D: 36 43 38 37 0d 00 00 '6C87...'
ups.debug.L: 31 31 35 41 30 31 0d '115A01.'
ups.debug.load_banks: 8
ups.debug.M: 30 30 37 31 0d 00 00 '0071...'
ups.debug.P: 30 35 30 30 0d 00 00 '0500...'
ups.debug.S: 31 34 30 30 30 30 0d '140000.'
ups.debug.T: 39 31 32 35 37 31 0d '912571.'
ups.debug.V: 33 30 38 38 0d 00 00 '3088...'
ups.delay.shutdown: 64
ups.firmware: F1114.A
ups.firmware.aux: protocol 0005
ups.id: 65535
ups.mfr: Tripp Lite
ups.model: TRIPP LITE UPS
ups.power.nominal: 500
ups.productid: 0001
ups.status:
ups.vendorid: 09ae


>From talking with the tech support, it seems that the protocol version for
this unit should be 0003 and not 0005. Is there a way to force the protocol
version in the driver so I could test different results?

Thanks!
Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20180507/ba0d4de2/attachment.html>