[Nut-upsuser] Monitor UPS Brand SMS
Mario Michielin Neto
mario.michielin at gmail.com
Tue Aug 6 14:14:38 BST 2019
Hi Users NUT,
I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a
raspberry-pi. In compatibility list, is listed to use the blazer_ser
driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow
the comands e confs.
root at rasp:/home/pi# lsusb
*Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The description of equipment don't appear.
In the ups.conf, i used the follow lines.
driver = blazer_ser
port = /dev/ttyUSB0
desc = "SMS 8 KVA"
When start the process by the nut, i received a Error message:
root at rasp:/etc/nut# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Megatec/Q1 protocol serial driver 1.57 (2.7.4)
No supported UPS detected
Driver failed to start (exit status=1)
Somebody could help me to accomplish the monitoring.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser