[Nut-upsuser] Monitor Eaton 93PS UPS

[lst_hoe02 at kwsoft.de]

Zitat von lst_hoe02 at kwsoft.de:
> Zitat von nicolae788 <nicolae788 at gmail.com>:
>
>> I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on
>> usb i get frequent communication errors and data aquisition stopped. Mine
>> has a serial connection, also. Operating via serial has no trouble. Maybe
>> it's something related to usb setting in bios, i.e. Legacy mode, speed
>> setting, etc.
>> However on serial mode looks like the eaton or hoe power protector software
>> does not record any statistics...
>
> On serial mode a simpler protocol is used to my knowledge, so it  
> might be that statistics missing in this case. Your problem with USB  
> could be related to issue  
> https://github.com/networkupstools/nut/issues/542 and should be  
> fixed in the actual code, but we use network (netxml-ups or  
> snmp-ups) and also have "data stale" errors.
>
> I hoped that someone could clarify if the USB issue mentioned is  
> also lurking in the network drivers.

Oh and there is also https://github.com/networkupstools/nut/issues/661  
but this one is from yesterday.

Can someone comment what is the recommended way to monitor a Eaton UPS  
with nut?
snmp-ups,netxml-ups or something other?

Regards

Andreas