[Nut-upsuser] Just an interesting data point

[Phil Stracchino]

Best result so far is actually with usbhid-ups.  I'm going to have to
get a USB hub though.

[backstop-usb]
  driver        = usbhid-ups
  port          = /dev/ttyUSB0
  vendorid      = 0764
  productid     = 0601
  desc          = "PR3000LCDRTXL2U USB"

minbar:root:~:24 # upsc backstop-usb at localhost
battery.charge: 100
battery.charge.low: 35
battery.charge.warning: 20
battery.mfr.date: CyberPower Systems
battery.runtime: 360
battery.runtime.low: 592
battery.type: PbAcid
battery.voltage: 53.8
battery.voltage.nominal: 48
device.mfr: CyberPower Systems
device.model: PR3000LCDRTXL2U
device.serial: PTEHU2000098
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyUSB0
driver.parameter.productid: 0601
driver.parameter.synchronous: no
driver.parameter.vendorid: 0764
driver.version: 2.7.4
driver.version.data: CyberPower HID 0.4
driver.version.internal: 0.41
input.transfer.high: 131
input.transfer.low: 102
input.voltage: 116.0
input.voltage.nominal: 120
output.voltage: 116.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 42
ups.mfr: CyberPower Systems
ups.model: PR3000LCDRTXL2U
ups.productid: 0601
ups.realpower.nominal: 3000
ups.serial: PTEHU2000098
ups.status: OL
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764



-- 
  Phil Stracchino
  Babylon Communications
  phils at caerllewys.net
  phil at co.ordinate.org
  Landline: +1.603.293.8485
  Mobile:   +1.603.998.6958