[Nut-upsuser] NUT on Raspberry PI 3b+

Vladimir Zaitchikov zaitchikk at gmail.com
Thu May 2 22:07:48 BST 2019


I was able to make NUT and my Powercom SPIDER UPS (USB port) work under 
the Raspberry Pi Desktop (Debian). Everything works in VMware 
Workstation 15 Player. But my Raspberry Pi 3b + (with raspbian) doesn’t 
work with the same UPS, and with same NUT configuration. Raspberry sees 
the UPS, but the driver does not cling.

Here is the response of Raspberry 3b + to some commands.

pi at raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 0d9f:0004 Powercom Co., Ltd
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

pi at raspberrypi:~ $ lsusb -v

Bus 001 Device 004: ID 0d9f:0004 Powercom Co., Ltd
Couldn't open device, some information will be missing
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0d9f Powercom Co., Ltd
   idProduct          0x0004
   bcdDevice            0.02
   iManufacturer           3
   iProduct                1
   iSerial                 2
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      0 No Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.00
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength     996
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval             100

pi at raspberrypi:~ $ sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
No matching HID UPS found
Driver failed to start (exit status=1)

And this is in the "ups.conf" file

maxretry = 3
[SPIDER]
     driver = usbhid-ups
     port = auto
     desc = "Powercom SPIDER"


-- 
С уважением
Зайчиков В А

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20190503/ad2e38ad/attachment.html>


More information about the Nut-upsuser mailing list