[Nut-upsuser] apc with rs232

[grumpy at mailfence.com]

On Tue, 28 May 2019, nicolae788 wrote:

> Apc uses a propietary serial cable and your convertar for sure it's wired
> standard. Refer to the following link for info.
> https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml
>
> Good luck
>
> On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote:
>
>> a friend gave me an old apc smart-ups 1250
>> it has a rs232 interface but i have no pc with a rs232 port
>> i attempted to use a rs232 to usb adapter but the ups goes nuts
>> i connected the ups to batteries and verified it was working properly
>> when i plug the usb cable into the pc the ups shuts down
>> when i attempt to turn it on it beeps twice and shuts down
>> this all occurs before i start the nut software
>> other than give up or buy a new ups, any suggestions
>>
>> _______________________________________________
>> Nut-upsuser mailing list
>> Nut-upsuser at alioth-lists.debian.net
>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>

super
i'll make up a cable and give it a try