[Nut-upsuser] [EXTERNAL] Re: This Liebert device (10af:0002) is not supported. Newer Lithium PSI5 device.

[Joe Reid]

I think David's on to something.  I also edited
/etc/udev/rules.d/62-nut-usbups.rules

#  Liebert PowerSure PST UPS  - usbhid-ups
ATTR{idVendor}=="10af", ATTR{idProduct}=="0002", MODE="664", GROUP="nut"

is probably the the line I added

On 12/11/2020 4:13 PM, David Zomaya wrote:
>> Can't claim USB device [10af:0002]: could not detach kernel driver from interface 0: Operation not permitted
>> Driver failed to start (exit status=1)
>
>
>> Anything else I can try?
> Maybe adding a udev rule like:
>
> # /etc/udev/rules.d/90-nut-ups.rules
> ACTION=="add", \
> SUBSYSTEM=="usb", \
> ATTR{idVendor}=="10af", ATTR{idProduct}=="0002", \
> MODE="0660", GROUP="nut"
>
> Be sure to reboot or reload Udev rules after
>
> Credit to AskUbuntu https://askubuntu.com/a/276637 for initially helping me figure this out.
>
>
> Thank you,
> David Zomaya
> Tripp Lite
>
>
> ________________________________
>   This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.


-- 
joe