[Nut-upsuser] [EXTERNAL] Re: OMNIVSX1000D Compatibility

[David Zomaya]

Did you see what objecttothis posted on GitHub already?

In any event, your issue with NUT and the 3024 AVR750U is that the UPS reboots output instead of shutting off when the shutdown command is sent, correct?

Good suggestion on the driver authors, thanks.




 Thank you,
 David Zomaya





From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Scott Colby <scott at scolby.com>
Sent: Saturday, July 25, 2020 4:11 PM
To: nut-upsuser at alioth-lists.debian.net
Subject: [EXTERNAL] Re: [Nut-upsuser] OMNIVSX1000D Compatibility


______________________________________________________________________
Hi,

I can confirm that with my AVR750U connected to my Windows machine
using the TrippLite Power Alert software, I can configure it to do
the behavior I want: turn off at a low power level and turn back
on when the power is reconnected, so I guess it's now a question
of if NUT can be adapted to the 3024 protocol.

I am not the most experienced C programmer out there, but given
there are extensive examples in the rest of the NUT USB drivers, I
would be willing to take a stab at a Pull Request to integrate the
protocol once the documentation has been provided. I also noticed
that there are some names at the top of the TrippLite USB HID driver
source file. Perhaps it would be worth reaching out to them for
advice.

Scott

________________________________
 This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.