[Nut-upsuser] NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04

[Yogesh Bhanu]

Hi Manuel et.al,

Going thru the documentation -- it seems this configuration specific
to blazer_ups.
https://networkupstools.org/docs/man/blazer_usb.html

Kind Regards,

Yogesh

On Fri, May 15, 2020 at 12:53 PM Manuel Wolfshant
<wolfy at nobugconsulting.ro> wrote:
>
> On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
> > [...]
> > # Is it possible to calculate  /estimate how much time is left when on
> > battery  ?
>
>
> When the UPS does not report that, you can ask nut to provide an
> estimate by using the runtimecal directive. For instance I have in
> ups.conf on a system where I use an Inform low-end UPS:
>
>          runtimecal = 120,100,480,50
>          default.battery.voltage.low = 21.2
>          default.battery.voltage.high = 27.7
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser