[Nut-upsuser] NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04

[Manuel Wolfshant]

On 5/19/20 10:39 AM, Yogesh Bhanu wrote:
> Hi Manuel et.al,
>
> Going thru the documentation -- it seems this configuration specific
> to blazer_ups.
> https://networkupstools.org/docs/man/blazer_usb.html
>
> Kind Regards,

Other drivrs support that option as well. Here is a quote from the same 
config as before:

[guardian]
         driver = nutdrv_qx
         port = auto

Did you actually test and it failed ?



> Yogesh
>
> On Fri, May 15, 2020 at 12:53 PM Manuel Wolfshant
> <wolfy at nobugconsulting.ro> wrote:
>> On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
>>> [...]
>>> # Is it possible to calculate  /estimate how much time is left when on
>>> battery  ?
>>
>> When the UPS does not report that, you can ask nut to provide an
>> estimate by using the runtimecal directive. For instance I have in
>> ups.conf on a system where I use an Inform low-end UPS:
>>
>>           runtimecal = 120,100,480,50
>>           default.battery.voltage.low = 21.2
>>           default.battery.voltage.high = 27.7
>>
>>
>>
>> _______________________________________________
>> Nut-upsuser mailing list
>> Nut-upsuser at alioth-lists.debian.net
>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser