[Nut-upsuser] NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04

[Yogesh Bhanu]

Hi Mauel,

No dice. The config does not show up
config:
--8<--
[tripp]
    driver = usbhid-ups
    port = auto
    vendorid = 09ae
    productid = 2009
    bus = 001
    desc = "Tripp Lite SMX1000LCD"
    runtimecal = 660,100,180,50
-->8--

output:
--8<--
 upsc tripp
Init SSL without certificate database
battery.charge: 100
battery.runtime: 736
battery.type: PbAc
battery.voltage: 13.5
battery.voltage.nominal: 12.0
device.mfr: Tripp Lite
device.model: TRIPP LITE UPS
device.serial: FW-2473 A
device.type: ups
driver.name: usbhid-ups
driver.parameter.bus: 001
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 2009
driver.parameter.synchronous: no
driver.parameter.vendorid: 09ae
driver.version: 2.7.4
driver.version.data: TrippLite HID 0.82
driver.version.internal: 0.41
input.frequency: 49.8
input.voltage: 225.5
input.voltage.nominal: 230
output.frequency.nominal: 50
output.voltage.nominal: 230
ups.beeper.status: disabled
ups.delay.shutdown: 20
ups.mfr: Tripp Lite
ups.model: TRIPP LITE UPS
ups.power.nominal: 1000
ups.productid: 2009
ups.serial: FW-2473 A
ups.status: OL
ups.timer.reboot: 65535
ups.timer.shutdown: 65535
ups.vendorid: 09ae
ups.watchdog.status: 0
-->8--

Kind Regards,

Yogi

On Tue, May 19, 2020 at 12:12 PM Manuel Wolfshant
<wolfy at nobugconsulting.ro> wrote:
>
> On 5/19/20 10:39 AM, Yogesh Bhanu wrote:
> > Hi Manuel et.al,
> >
> > Going thru the documentation -- it seems this configuration specific
> > to blazer_ups.
> > https://networkupstools.org/docs/man/blazer_usb.html
> >
> > Kind Regards,
>
> Other drivrs support that option as well. Here is a quote from the same
> config as before:
>
> [guardian]
>          driver = nutdrv_qx
>          port = auto
>
> Did you actually test and it failed ?
>
>
>
> > Yogesh
> >
> > On Fri, May 15, 2020 at 12:53 PM Manuel Wolfshant
> > <wolfy at nobugconsulting.ro> wrote:
> >> On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
> >>> [...]
> >>> # Is it possible to calculate  /estimate how much time is left when on
> >>> battery  ?
> >>
> >> When the UPS does not report that, you can ask nut to provide an
> >> estimate by using the runtimecal directive. For instance I have in
> >> ups.conf on a system where I use an Inform low-end UPS:
> >>
> >>           runtimecal = 120,100,480,50
> >>           default.battery.voltage.low = 21.2
> >>           default.battery.voltage.high = 27.7
> >>
> >>
> >>
> >> _______________________________________________
> >> Nut-upsuser mailing list
> >> Nut-upsuser at alioth-lists.debian.net
> >> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser