[Nut-upsuser] UPS recommendation for NUT and power-on-delay support

[Bartosz]

Hi,

thanks very much for sharing this information.
It seems that this model has the feature:

ups.delay.start: 30

Best Regards,
Bart

pt., 11 wrz 2020, 23:57 użytkownik Dan Langille <dan at langille.org> napisał:

> On Fri, Sep 11, 2020, at 4:05 PM, Bartosz wrote:
>
> Dear All,
>
> Could you please recommend me a UPS with 100% support of the ondelay
> parameter and NUT compatibility?
>
> 850 or 1000 VA
>
> I have the EATON 5E850iUSBDIN UPS and it does not support this parameter
> so I would like to buy another UPS that for sure will support it.
>
> Thank you,
> Bart
>
>
> Can you tell from this output? If not, what should I be looking for to
> answer your question?
>
> [dan at slocum:~] $ upsc ups02
> battery.capacity: 9.00
> battery.charge: 100
> battery.charge.low: 20
> battery.charge.restart: 0
> battery.charger.status: resting
> battery.energysave: no
> battery.protection: yes
> battery.runtime: 1941
> battery.type: PbAc
> device.mfr: EATON
> device.model: Eaton 5PX 2200
> device.serial: G091C30079
> device.type: ups
> driver.name: dummy-ups
> driver.parameter.mode: repeater
> driver.parameter.pollinterval: 2
> driver.parameter.port: ups02 at bast.int.unixathome.org
> driver.parameter.synchronous: no
> driver.version: 2.7.4
> driver.version.internal: 0.14
> input.current: 0.00
> input.frequency: 59.9
> input.frequency.extended: no
> input.frequency.nominal: 60
> input.sensitivity: normal
> input.transfer.boost.low: 102
> input.transfer.high: 151
> input.transfer.low: 89
> input.transfer.trim.high: 132
> input.voltage: 116.7
> input.voltage.extended: no
> input.voltage.nominal: 120
> outlet.1.autoswitch.charge.low: 0
> outlet.1.current: 3.70
> outlet.1.delay.shutdown: 65535
> outlet.1.delay.start: 3
> outlet.1.desc: PowerShare Outlet 1
> outlet.1.id: 1
> outlet.1.power: 432
> outlet.1.powerfactor: 94.00
> outlet.1.realpower: 410
> outlet.1.status: on
> outlet.1.switchable: yes
> outlet.2.autoswitch.charge.low: 0
> outlet.2.current: 5.50
> outlet.2.delay.shutdown: 65535
> outlet.2.delay.start: 6
> outlet.2.desc: PowerShare Outlet 2
> outlet.2.id: 2
> outlet.2.power: 630
> outlet.2.powerfactor: 97.00
> outlet.2.realpower: 616
> outlet.2.status: on
> outlet.2.switchable: yes
> outlet.current: 0.00
> outlet.desc: Main Outlet
> outlet.id: 0
> outlet.power: 0
> outlet.powerfactor: 0.00
> outlet.realpower: 0
> outlet.switchable: no
> output.current: 9.10
> output.frequency: 59.9
> output.frequency.nominal: 60
> output.powerfactor: 0.96
> output.voltage: 116.7
> output.voltage.nominal: 120
> ups.beeper.status: enabled
> ups.delay.shutdown: 20
> ups.delay.start: 30
> ups.efficiency: 97
> ups.firmware: 06
> ups.load: 52
> ups.load.high: 105
> ups.mfr: EATON
> ups.model: Eaton 5PX 2200
> ups.power: 1062
> ups.power.nominal: 2200
> ups.productid: ffff
> ups.realpower: 1030
> ups.realpower.nominal: 1980
> ups.serial: G091C30079
> ups.shutdown: enabled
> ups.start.auto: yes
> ups.start.battery: yes
> ups.start.reboot: yes
> ups.status: OL
> ups.test.interval: 604800
> ups.test.result: Done and passed
> ups.timer.shutdown: 0
> ups.timer.start: 0
> ups.type: offline / line interactive
> ups.vendorid: 0463
>
> --
>   Dan Langille
>   dan at langille.org
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200919/ec075f6a/attachment.html>