[Nut-upsuser] UPS recommendation for NUT and power-on-delay support

[Bartosz]

Thank you Roger for the information. You are right, I bought the Eaton Eco
1600 2 months ago and the ondelay type of feature was not listed nor
supported so I had to return the UPS back to the store.

Best Regards,
Bart

sob., 12 wrz 2020, 17:00 użytkownik Roger Price <roger at rogerprice.org>
napisał:

> On Fri, 11 Sep 2020, Bartosz wrote:
>
> > Could you please recommend me a UPS with 100% support of the ondelay
> parameter
> > and NUT compatibility? 850 or 1000 VA I have the EATON 5E850iUSBDIN UPS
> and it
> > does not support this parameter so I would like to buy another UPS that
> for
> > sure will support it.
>
> I have an Eaton Ellipse Eco 1600 bought in 2016 which has a delayed start
> feature.  If wall power returns quickly, the UPS will wait this time to
> restart
> the outlets.  But now that manufacturers seem to be silently removing this
> feature from their UPS's I don't know if the current versions support
> ups.delay.start
>
> On Fri, 11 Sep 2020, Dan Langille wrote:
>
> > Can you tell from this output? If not, what should I be looking for to
> answer
> > your question?
>
> If I understand the question correctly:
>
> > ups.delay.shutdown: 20
> > ups.delay.start: 30
>
> Perhaps these commands also do something similar, but my Ellipse 1600 does
> not
> have them:
>
> > outlet.1.delay.shutdown: 65535
> > outlet.1.delay.start: 3
>
> Roger
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200919/bffd7c3a/attachment-0001.html>