[Nut-upsuser] [EXTERNAL] Couple questions about the output of upsc command

[Nathan Dehnel]

>Can you login via SSH?
Yes.

On Fri, Jun 11, 2021 at 6:17 PM David Zomaya <David_Zomaya at tripplite.com>
wrote:

> > Yes in the LCD. The WEBCARDLX GUI gives connection refused when I try to
> open it in a browser.
> Can you login via SSH?
>
> I ask because assuming HTTP(S) is enabled... not getting into the GUI
> suggests a different problem... one that might be contributing to data not
> updating in Network UPS Tools.
>
> Generally, I'd approach this by:
> 1- Making sure we get the WEBCARDLX working and reporting data correctly
> in the GUI/SSH/SNMP (basically, data should match the LCD or be very close
> to it)
> 2- Look at possible issues with NUT
>
> If you can't get in via SSH either, can you reboot the WEBCARDLX (does not
> impact UPS output) either via the reset button (just below/above the middle
> of the two Ethernet LEDs) or by removing and reinserting the WEBCARDLX and
> try again?
>
>  Thank you,
>  David Zomaya
>  Tripp Lite
>
>
>
>
> ________________________________
>  This message is for the addressee's use only. It may contain confidential
> information. If you receive this message in error, please delete it and
> notify the sender. Tripp Lite disclaims all warranties and liabilities, and
> assumes no responsibility for viruses which may infect an email sent to you
> from Tripp Lite and which damage your electronic systems or information. It
> is your responsibility to maintain virus detection systems to prevent
> damage to your electronic systems and information.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210613/28a1a61f/attachment-0001.htm>