[Nut-upsuser] [EXTERNAL] Couple questions about the output of upsc command

[David Zomaya]

>>Can you login via SSH?
>Yes.
Ok, great. Assuming you're running our 15.x.x firmware*, from the main menu, you can access a "Devices" menu where you can then drill down and view runtime/battery values.
You'll need to refresh the screen with the enter key to get updates, but the same test I mentioned with the GUI would be useful now. See if the runtime and battery values in the SSH menu track with the LCD.

>From my end:
I'll be able to run a test with a similar UPS and the SNMP driver later in the week. Generally, we support the UPS MIB so I expect most/all off those variables to work.

*if you're running the newer 20.0.0.2526 same test is possible, but it's a CLI. Let me know and I'll shoot over the commands.



Thank you,
David Zomaya
Tripp Lite




________________________________
 This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.