[Nut-upsuser] [EXTERNAL] CP1350PFCLCD - Reporting wrong output voltage as 136 VAC

[S K]

 Hey wolfy,How do I run the debug mode on command line? FYI, I have a raspberry PI "monitoring" the cyber power UPS and my cyper power UPS (identical ones) are physically connected to Synology NAS and Openmediavault
    On Wednesday, November 16, 2022 at 08:00:24 PM EST, Manuel Wolfshant <manuel.wolfshant at gmail.com> wrote:  
 
 

On November 17, 2022 1:09:34 AM GMT+02:00, S K via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote:
> The display shows 119V 

Can you please run the driver in debug mode (-DDD), collect 20-30 secs worth of logs and then let us see them (I guess a zip sent here should do ) ?
We have to see what actual values  is the UPS sending in order to differentiate between UPS reporting incorrect values and nut misinterpreting the values it receives.

wolfy

-- 

>  On Wednesday, November 16, 2022 at 05:55:00 PM EST, Zomaya, David <davidzomaya at eaton.com> wrote:  
> 
> >  Hey there I have NUT version 2.7.4 and the Cyber Power CP1350PFCLCD reports as 136 volts as output! Interesting I have two of the same model and they report the SAME output 136 VA
>
>Does the LCD report an OUTPUT voltage value other than 136?
> CP1350PFCLCD is a line interactive UPS so maybe it is boosting input. 
>
>Thanks,
>David Zomaya
>
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20221117/e34046cc/attachment-0001.htm>