[Nut-upsuser] [EXTERNAL] CP1350PFCLCD - Reporting wrong output voltage as 136 VAC
inagar68 at yahoo.com
Thu Nov 17 15:06:40 GMT 2022
I see this problem all over.....https://github.com/networkupstools/nut/issues/439
On Thursday, November 17, 2022 at 10:00:48 AM EST, S K <inagar68 at yahoo.com> wrote:
Ok figured out to get logs. Please find enclosed logs...looks like the driver does report as output 136V
On Wednesday, November 16, 2022 at 09:35:27 PM EST, S K via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote:
Hey wolfy,How do I run the debug mode on command line? FYI, I have a raspberry PI "monitoring" the cyber power UPS and my cyper power UPS (identical ones) are physically connected to Synology NAS and Openmediavault
On Wednesday, November 16, 2022 at 08:00:24 PM EST, Manuel Wolfshant <manuel.wolfshant at gmail.com> wrote:
On November 17, 2022 1:09:34 AM GMT+02:00, S K via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote:
> The display shows 119V
Can you please run the driver in debug mode (-DDD), collect 20-30 secs worth of logs and then let us see them (I guess a zip sent here should do ) ?
We have to see what actual values is the UPS sending in order to differentiate between UPS reporting incorrect values and nut misinterpreting the values it receives.
> On Wednesday, November 16, 2022 at 05:55:00 PM EST, Zomaya, David <davidzomaya at eaton.com> wrote:
> > Hey there I have NUT version 2.7.4 and the Cyber Power CP1350PFCLCD reports as 136 volts as output! Interesting I have two of the same model and they report the SAME output 136 VA
>Does the LCD report an OUTPUT voltage value other than 136?
> CP1350PFCLCD is a line interactive UPS so maybe it is boosting input.
Nut-upsuser mailing list
Nut-upsuser at alioth-lists.debian.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Nut-upsuser