[Nut-upsuser] Enhanced driver troubleshooting

[gene heskett]

On 4/24/23 14:05, Jim Klimov wrote:
> "I'd thought you'd never ask" (C)
> 
> Can you give this walkthrough a shot?
> https://github.com/networkupstools/nut/wiki/Building-NUT-for-in%E2%80%90place-upgrades-or-non%E2%80%90disruptive-tests
> 
> Jim
> 
I used this section of that link to build the new one:
This goes similar to usual build and install from Git:

:; cd /tmp
:; git clone https://github.com/networkupstools/nut
:; cd nut
:; ./autogen.sh
:; ./configure --enable-inplace-runtime # --maybe-some-other-options
:; make -j 4 all && make -j 4 check && sudo make install

configure was very noisy but no show-stoppers
Stopped it all before the install, and had to sudo systemctl 
reload-daemons and now on restart, get
  pi at rpi4:/media/pi/workspace/nut $ sudo /etc/init.d/nut-server start
[ ok ] Starting nut-server (via systemctl): nut-server.service.
pi at rpi4:/media/pi/workspace/nut $ sudo /etc/init.d/nut-client start
[ ok ] Starting nut-client (via systemctl): nut-client.service.
pi at rpi4:/media/pi/workspace/nut $ sudo /etc/init.d/ups-monitor start
pi at rpi4:/media/pi/workspace/nut $ upsc myups
Error: Connection failure: Connection refused

I did a sudo cp -R /etc/nut to /etc/nut-bak so I've got all the old 
config I hope. Whats next? And thanks Jim.
take care & stay well.

[...]

Cheers, Gene Heskett.
-- 
"There are four boxes to be used in defense of liberty:
  soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
  - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>