[Nut-upsuser] got nut 2.8.1 but despite reinstall, shows 2.7.4

gene heskett gheskett at shentel.net
Mon May 22 14:24:44 BST 2023


On 5/22/23 03:10, gene heskett wrote:
> Which file in the nut I pulled a month ago, should I start with to get 
> the new version actually running? I still get - -V=2.7.4

The UPGRADING file tsalks about a 2.8.1, but I have started with the 
autogen 3 times in the usual sequence, winding up with 2.7.4 twice, and 
while the third time is supposed yo be a charm, now it won't run at all.

pi at rpi4:/etc/nut $ sudo /etc/init.d/nut-server restart
[ ok ] Restarting nut-server (via systemctl): nut-server.service.
You have new mail in /var/mail/pi
pi at rpi4:/etc/nut $ sudo /etc/init.d/nut-server status
● nut-server.service - Network UPS Tools - power devices information server
    Loaded: loaded (/lib/systemd/system/nut-server.service; enabled; 
vendor preset: enabled)
    Active: failed (Result: exit-code) since Mon 2023-05-22 08:41:00 
EDT; 4s ago
   Process: 12060 ExecStartPre=/bin/systemd-tmpfiles --create 
/usr/lib/tmpfiles.d/nut-common-tmpfiles.conf (code=exited, status=0/SUCCESS)
   Process: 12061 ExecStart=/usr/local/ups/sbin/upsd -F (code=exited, 
status=1/FAILURE)
  Main PID: 12061 (code=exited, status=1/FAILURE)

4th try, starting from make distclean, then autogen.sh, ./configure 
--with-all, got this exit:
checking whether to build USB drivers... yes (libusb-1.0)
configure: error: neon libraries not found, required for neon based 
XML/HTTP driver

there are three neon related packages installed.
libdav1d3
libjpeg62-turbo
libneon27-gnutls

This on an rpi4b running armhf, buster.
next?


Cheers, Gene Heskett.
-- 
"There are four boxes to be used in defense of liberty:
  soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
  - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>




More information about the Nut-upsuser mailing list