[Nut-upsuser] clearing the 'Replace Battery' on Eaton 5PX

[Dan Langille]

I thought I could clear the Eaton 5PX battery message. I've failed.

The following is based on https://haefelfinger.ch/posts/2020/2020-09-23-reset-battery-alert-eaton-5p-ups/

I shutdown the UPS. I disconnected it from power. I disconnected both the main battery and the external battery pack. I pressed the power on button several times, until the clicking stopped....

I waited 10 minutes. Connect it all back up. The warning persists.

The webpage for the UPS the battery status is OK. That must be charge level (90%).

If I check from the command line:

[19:41 r730-01 dvl ~] % upsc ups02 | grep -i alarm
ups.alarm: Replace battery!
ups.status: ALARM OL CHRG RB

I've gone though the front panel options and didn't see anything for resetting this warning.

I have found one suggestion: update firmware.

Ideas please?

-- 
  Dan Langille
  dan at langille.org