[Nut-upsuser] Liebert Vertiv PSA5

[Greg Oliver]

On Fri, Dec 20, 2024 at 7:33 PM Mario Wolczko <mario at wolczko.com> wrote:
>
> Today I installed NUT on a RPi via the Home Assistant add-on (HA running on HAssOS), to manage a Liebert Vertiv PSA5.  I used the latest version of everything.
>
> At first I got these messages in the log:
>
> Bus 001 Device 005: ID 10af:0002 Liebert Corp. PowerSure PST UPS
> …
> [13:17:32] INFO: Starting the UPS drivers...
> This Liebert device (10af:0002) is not (or perhaps not yet) supported
> by usbhid-ups. Please make sure you have an up-to-date version of NUT. If
> this does not fix the problem, try running the driver with the
> '-x productid=0002' option. Please report your results to the NUT user's
> mailing list <nut-upsuser at lists.alioth.debian.org>.
>
> After adding the recommended option to the config, NUT ran, but the entities presented via the HA NUT integration are, well, disappointing:
>
> The second appears somewhat redundant, and, assuming I’m interpreting the first correctly, it is wrong: the UPS is on line power.
> Is this to be expected?
>
> Thanks,
> Mario
>
>  Add-on version: 0.14.0
>  You are running the latest version of this add-on.
>  System: Home Assistant OS 14.1  (aarch64 / raspberrypi4-64)
>  Home Assistant Core: 2024.12.1
>  Home Assistant Supervisor: 2024.12.0
>
>  Network UPS Tools upsd 2.8.0
>  Network UPS Tools upsmon 2.8.0
>
> Network UPS Tools - Generic HID driver 0.47 (2.8.0)
> USB communication driver (libusb 1.0) 0.43
> Using subdriver: Belkin/Liebert HID 0.18
> Network UPS Tools - UPS driver controller 2.8.0
>

https://github.com/networkupstools/nut/pull/2629