[Pkg-acpi-devel] Bug#587656: acpid 1:2.0.6-1 bug report
Dan Dagan
dan at dagan.biz
Wed Jun 30 22:52:20 UTC 2010
Package: acpid
Version: 1:2.0.6-1
Severity: critical
Tags: upstream
Justification: breaks unrelated software
After installing acpid 1:2.0.6-1 the laptop keyboard and mouse pad
generate no input to X.
Attached USB keyboard is functional but Caps Lock & num Lock leds are
not turned on when pressed from the USB keyboard
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages acpid depends on:
ii libc6 2.11.2-2 Embedded GNU C Library:
Shared lib
ii lsb-base 3.2-23.1 Linux Standard Base 3.2
init scrip
ii module-init-tools 3.12~pre2-3 tools for managing Linux
kernel mo
Versions of packages acpid recommends:
ii acpi-support-base 0.136-4 scripts for handling base
ACPI eve
acpid suggests no packages.
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben at decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=635b3a19-e4df-49a7-a9a5-e176d3df17dd ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6d0000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] RAMDISK: 37794000 - 37fef0a0
[ 0.000000] ACPI: RSDP 00000000000f7b40 00024 (v02 Compal)
[ 0.000000] ACPI: XSDT 00000000bf6d87b0 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf6dfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bf6d9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf6e2fc0 00040
[ 0.000000] ACPI: APIC 00000000bf6dfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bf6dfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bf6dfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bf6dfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bf6dfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: SLIC 00000000bf6dfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
[ 0.000000] ACPI: APIC 00000000bf6dff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf6dffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6d98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6d8dc8 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6d8d22 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6d883c 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi at vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000003bfff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680314] TEXT DATA BSS ==> [0001000000 - 0001680314]
[ 0.000000] #3 [0037794000 - 0037fef0a0] RAMDISK ==> [0037794000 - 0037fef0a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001681000 - 00016811a8] BRK ==> [0001681000 - 00016811a8]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] found SMP MP-table at [ffff8800000f7bc0] f7bc0
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6d0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3840 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765704 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf6e3000
[ 0.000000] PM: Registered nosave memory: 00000000bf6e3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005200000 s90008 r8192 d20584 u1048576
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028104
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=635b3a19-e4df-49a7-a9a5-e176d3df17dd ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000531d000 - ffff88000931d000
[ 0.000000] software IO TLB at phys 0x531d000 - 0x931d000
[ 0.000000] Memory: 4045320k/5242880k available (3060k kernel code, 1058372k absent, 139188k reserved, 1885k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.300 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.60 BogoMIPS (lpj=9577200)
[ 0.004024] Security Framework initialized
[ 0.004030] SELinux: Disabled at boot.
[ 0.004339] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006683] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007855] Mount-cache hash table entries: 256
[ 0.008094] Initializing cgroup subsys ns
[ 0.008099] Initializing cgroup subsys cpuacct
[ 0.008102] Initializing cgroup subsys devices
[ 0.008103] Initializing cgroup subsys freezer
[ 0.008105] Initializing cgroup subsys net_cls
[ 0.008130] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008132] CPU: L2 cache: 4096K
[ 0.008135] CPU 0/0x0 -> Node 0
[ 0.008137] CPU: Physical Processor ID: 0
[ 0.008138] CPU: Processor Core ID: 0
[ 0.008142] mce: CPU supports 6 MCE banks
[ 0.008148] CPU0: Thermal monitoring handled by SMI
[ 0.008152] using mwait in idle threads.
[ 0.008154] Performance Events: Core2 events, Intel PMU driver.
[ 0.008159] ... version: 2
[ 0.008160] ... bit width: 40
[ 0.008161] ... generic registers: 2
[ 0.008163] ... value mask: 000000ffffffffff
[ 0.008164] ... max period: 000000007fffffff
[ 0.008165] ... fixed-purpose events: 3
[ 0.008166] ... event mask: 0000000700000003
[ 0.008972] ACPI: Core revision 20090903
[ 0.020065] Setting APIC routing to flat
[ 0.020424] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061083] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 4096K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.148107] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0a
[ 0.148114] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152016] Brought up 2 CPUs
[ 0.152018] Total of 2 processors activated (9576.56 BogoMIPS).
[ 0.152572] CPU0 attaching sched-domain:
[ 0.152575] domain 0: span 0-1 level MC
[ 0.152577] groups: 0 1
[ 0.152583] CPU1 attaching sched-domain:
[ 0.152585] domain 0: span 0-1 level MC
[ 0.152587] groups: 1 0
[ 0.152663] devtmpfs: initialized
[ 0.154917] regulator: core version 0.5
[ 0.154917] NET: Registered protocol family 16
[ 0.156058] ACPI: bus type pci registered
[ 0.156124] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.156126] PCI: Not using MMCONFIG.
[ 0.156128] PCI: Using configuration type 1 for base access
[ 0.156447] bio: create slab <bio-0> at 0
[ 0.156589] ACPI: EC: Look up EC in DSDT
[ 0.159018] ACPI: BIOS _OSI(Linux) query ignored
[ 0.163335] ACPI: Interpreter enabled
[ 0.163339] ACPI: (supports S0 S3 S4 S5)
[ 0.163356] ACPI: Using IOAPIC for interrupt routing
[ 0.163416] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184247] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.194303] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.236574] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.236874] ACPI: No dock devices found.
[ 0.237427] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.237511] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff]
[ 0.237517] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.237522] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.237556] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
[ 0.237676] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.237747] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.237821] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8704800-0xf8704bff]
[ 0.237888] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.237893] pci 0000:00:1a.7: PME# disabled
[ 0.237947] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8700000-0xf8703fff]
[ 0.238008] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238013] pci 0000:00:1b.0: PME# disabled
[ 0.238106] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238110] pci 0000:00:1c.0: PME# disabled
[ 0.238205] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.238210] pci 0000:00:1c.1: PME# disabled
[ 0.238306] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.238311] pci 0000:00:1c.2: PME# disabled
[ 0.238406] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.238410] pci 0000:00:1c.3: PME# disabled
[ 0.238505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.238510] pci 0000:00:1c.4: PME# disabled
[ 0.238605] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.238610] pci 0000:00:1c.5: PME# disabled
[ 0.238678] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.238745] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.238811] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.238884] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8704c00-0xf8704fff]
[ 0.238951] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.238956] pci 0000:00:1d.7: PME# disabled
[ 0.239132] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.239136] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.239140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.239145] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.239149] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
[ 0.239202] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.239210] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.239218] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.239225] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.239234] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.239309] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
[ 0.239316] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7]
[ 0.239324] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df]
[ 0.239331] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3]
[ 0.239339] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.239346] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8704000-0xf87047ff]
[ 0.239388] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.239392] pci 0000:00:1f.2: PME# disabled
[ 0.239426] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.239450] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.239538] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.239543] pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff]
[ 0.239551] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff]
[ 0.239785] pci 0000:04:00.0: reg 10 64bit mmio: [0xf0000000-0xf000ffff]
[ 0.240032] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.240043] pci 0000:04:00.0: PME# disabled
[ 0.240550] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.240555] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.240562] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff]
[ 0.240623] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.240628] pci 0000:00:1c.2: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.240635] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfc000000-0xfdffffff]
[ 0.240699] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
[ 0.240703] pci 0000:00:1c.3: bridge 32bit mmio: [0xb8000000-0xbbffffff]
[ 0.240719] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xc8000000-0xc9ffffff]
[ 0.240791] pci 0000:0a:00.0: reg 10 32bit mmio: [0xf8300000-0xf83003ff]
[ 0.240813] pci 0000:0a:00.0: reg 18 io port: [0x6000-0x607f]
[ 0.240853] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.248122] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
[ 0.248126] pci 0000:00:1c.4: bridge 32bit mmio: [0xf8300000-0xf83fffff]
[ 0.248315] pci 0000:0c:00.0: reg 10 32bit mmio: [0xf8200000-0xf8200fff]
[ 0.248550] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.248562] pci 0000:0c:00.0: PME# disabled
[ 0.248665] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.248823] pci 0000:00:1c.5: bridge 32bit mmio: [0xf8200000-0xf82fffff]
[ 0.248882] pci 0000:0e:06.0: reg 10 32bit mmio: [0xf8400000-0xf84007ff]
[ 0.248942] pci 0000:0e:06.0: supports D1 D2
[ 0.248944] pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.248948] pci 0000:0e:06.0: PME# disabled
[ 0.248991] pci 0000:0e:06.1: reg 10 32bit mmio: [0xf8400800-0xf84008ff]
[ 0.249050] pci 0000:0e:06.1: supports D1 D2
[ 0.249052] pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249057] pci 0000:0e:06.1: PME# disabled
[ 0.249099] pci 0000:0e:06.2: reg 10 32bit mmio: [0xf8400c00-0xf8400cff]
[ 0.249159] pci 0000:0e:06.2: supports D1 D2
[ 0.249161] pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249165] pci 0000:0e:06.2: PME# disabled
[ 0.249208] pci 0000:0e:06.3: reg 10 32bit mmio: [0xf8401000-0xf84010ff]
[ 0.249268] pci 0000:0e:06.3: supports D1 D2
[ 0.249269] pci 0000:0e:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249274] pci 0000:0e:06.3: PME# disabled
[ 0.249334] pci 0000:00:1e.0: transparent bridge
[ 0.249341] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8400000-0xf84fffff]
[ 0.249393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.249604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.249675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.249743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.249810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.249876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.249944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.250033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.256729] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.256819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.256907] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.256994] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.257083] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.257170] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.257257] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.257344] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.257425] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.257441] vgaarb: loaded
[ 0.257471] PCI: Using ACPI for IRQ routing
[ 0.257471] pci 0000:00:1c.3: BAR 14: address space collision on of bridge [0xb8000000-0xbbffffff]
[ 0.257471] pci 0000:00:1c.3: BAR 14: can't allocate resource
[ 0.257471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.257471] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264019] Switching to clocksource tsc
[ 0.265103] pnp: PnP ACPI init
[ 0.265110] ACPI: bus type pnp registered
[ 0.283956] pnp: PnP ACPI: found 10 devices
[ 0.283958] ACPI: ACPI bus type pnp unregistered
[ 0.283966] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.283969] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.283971] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.283974] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.283976] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.283979] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.283981] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.283984] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.283990] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.283995] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.283998] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.284000] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.284003] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.284005] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.284008] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.284010] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.288743] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.288747] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.288753] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc3ffffff
[ 0.288758] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff
[ 0.288766] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.288769] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.288775] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff
[ 0.288780] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff
[ 0.288787] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.288791] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.288797] pci 0000:00:1c.2: MEM window: 0xf4000000-0xf7ffffff
[ 0.288802] pci 0000:00:1c.2: PREFETCH window: 0x000000fc000000-0x000000fdffffff
[ 0.288809] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.288812] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.288819] pci 0000:00:1c.3: MEM window: 0xc4000000-0xc43fffff
[ 0.288823] pci 0000:00:1c.3: PREFETCH window: 0x000000c8000000-0x000000c9ffffff
[ 0.288831] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a
[ 0.288834] pci 0000:00:1c.4: IO window: 0x6000-0x6fff
[ 0.288841] pci 0000:00:1c.4: MEM window: 0xf8300000-0xf83fffff
[ 0.288845] pci 0000:00:1c.4: PREFETCH window: 0xc4400000-0xc45fffff
[ 0.288853] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c
[ 0.288856] pci 0000:00:1c.5: IO window: 0x7000-0x7fff
[ 0.288862] pci 0000:00:1c.5: MEM window: 0xf8200000-0xf82fffff
[ 0.288867] pci 0000:00:1c.5: PREFETCH window: 0x000000c4600000-0x000000c47fffff
[ 0.288875] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
[ 0.288877] pci 0000:00:1e.0: IO window: disabled
[ 0.288883] pci 0000:00:1e.0: MEM window: 0xf8400000-0xf84fffff
[ 0.288887] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.288903] alloc irq_desc for 17 on node -1
[ 0.288905] alloc kstat_irqs on node -1
[ 0.288909] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.288914] pci 0000:00:1c.0: setting latency timer to 64
[ 0.288924] alloc irq_desc for 16 on node -1
[ 0.288925] alloc kstat_irqs on node -1
[ 0.288928] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.288933] pci 0000:00:1c.1: setting latency timer to 64
[ 0.288942] alloc irq_desc for 18 on node -1
[ 0.288943] alloc kstat_irqs on node -1
[ 0.288946] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.288951] pci 0000:00:1c.2: setting latency timer to 64
[ 0.288962] alloc irq_desc for 19 on node -1
[ 0.288963] alloc kstat_irqs on node -1
[ 0.288966] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.288970] pci 0000:00:1c.3: setting latency timer to 64
[ 0.288980] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.288985] pci 0000:00:1c.4: setting latency timer to 64
[ 0.288995] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.288999] pci 0000:00:1c.5: setting latency timer to 64
[ 0.289006] pci 0000:00:1e.0: setting latency timer to 64
[ 0.289011] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.289013] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.289015] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.289017] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff]
[ 0.289020] pci_bus 0000:02: resource 2 pref mem [0xcc000000-0xcdffffff]
[ 0.289022] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.289024] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf3ffffff]
[ 0.289026] pci_bus 0000:04: resource 2 pref mem [0xfa000000-0xfbffffff]
[ 0.289028] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.289030] pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.289032] pci_bus 0000:06: resource 2 pref mem [0xfc000000-0xfdffffff]
[ 0.289034] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.289036] pci_bus 0000:08: resource 1 mem: [0xc4000000-0xc43fffff]
[ 0.289038] pci_bus 0000:08: resource 2 pref mem [0xc8000000-0xc9ffffff]
[ 0.289040] pci_bus 0000:0a: resource 0 io: [0x6000-0x6fff]
[ 0.289042] pci_bus 0000:0a: resource 1 mem: [0xf8300000-0xf83fffff]
[ 0.289044] pci_bus 0000:0a: resource 2 pref mem [0xc4400000-0xc45fffff]
[ 0.289046] pci_bus 0000:0c: resource 0 io: [0x7000-0x7fff]
[ 0.289048] pci_bus 0000:0c: resource 1 mem: [0xf8200000-0xf82fffff]
[ 0.289050] pci_bus 0000:0c: resource 2 pref mem [0xc4600000-0xc47fffff]
[ 0.289052] pci_bus 0000:0e: resource 1 mem: [0xf8400000-0xf84fffff]
[ 0.289054] pci_bus 0000:0e: resource 3 io: [0x00-0xffff]
[ 0.289056] pci_bus 0000:0e: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.289080] NET: Registered protocol family 2
[ 0.289222] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.290349] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.294485] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.295073] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.295076] TCP reno registered
[ 0.295195] NET: Registered protocol family 1
[ 0.295216] pci 0000:00:02.0: Boot video device
[ 0.295421] Unpacking initramfs...
[ 0.476098] Freeing initrd memory: 8556k freed
[ 0.480422] Simple Boot Flag at 0x38 set to 0x1
[ 0.480732] audit: initializing netlink socket (disabled)
[ 0.480746] type=2000 audit(1277897811.479:1): initialized
[ 0.481116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.482318] VFS: Disk quotas dquot_6.5.2
[ 0.482366] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482437] msgmni has been set to 7917
[ 0.482617] alg: No test for stdrng (krng)
[ 0.482662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.482664] io scheduler noop registered
[ 0.482666] io scheduler anticipatory registered
[ 0.482668] io scheduler deadline registered
[ 0.482693] io scheduler cfq registered (default)
[ 0.482842] alloc irq_desc for 24 on node -1
[ 0.482844] alloc kstat_irqs on node -1
[ 0.482857] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.482869] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.483021] alloc irq_desc for 25 on node -1
[ 0.483022] alloc kstat_irqs on node -1
[ 0.483031] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.483041] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.483187] alloc irq_desc for 26 on node -1
[ 0.483188] alloc kstat_irqs on node -1
[ 0.483197] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.483207] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.483358] alloc irq_desc for 27 on node -1
[ 0.483360] alloc kstat_irqs on node -1
[ 0.483368] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.483378] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.483526] alloc irq_desc for 28 on node -1
[ 0.483528] alloc kstat_irqs on node -1
[ 0.483536] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.483546] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.483694] alloc irq_desc for 29 on node -1
[ 0.483695] alloc kstat_irqs on node -1
[ 0.483703] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.483714] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.485118] Linux agpgart interface v0.103
[ 0.485130] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.486304] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.490981] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.491030] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.491353] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.491408] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.527177] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.527183] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.527246] mice: PS/2 mouse device common for all mice
[ 0.527283] rtc_cmos 00:07: RTC can wake from S4
[ 0.527321] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.527352] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.527360] cpuidle: using governor ladder
[ 0.527362] cpuidle: using governor menu
[ 0.527365] No iBFT detected.
[ 0.527638] TCP cubic registered
[ 0.527730] NET: Registered protocol family 10
[ 0.528100] lo: Disabled Privacy Extensions
[ 0.528332] Mobile IPv6
[ 0.528334] NET: Registered protocol family 17
[ 0.528404] PM: Resume from disk failed.
[ 0.528409] registered taskstats version 1
[ 0.529185] rtc_cmos 00:07: setting system clock to 2010-06-30 11:36:51 UTC (1277897811)
[ 0.529221] Initalizing network drop monitor service
[ 0.529241] Freeing unused kernel memory: 584k freed
[ 0.529391] Write protecting the kernel read-only data: 4208k
[ 0.540863] udev: starting version 157
[ 0.566278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.615985] usbcore: registered new interface driver usbfs
[ 0.616011] usbcore: registered new interface driver hub
[ 0.616842] usbcore: registered new device driver usb
[ 0.637858] SCSI subsystem initialized
[ 0.643221] alloc irq_desc for 22 on node -1
[ 0.643224] alloc kstat_irqs on node -1
[ 0.643231] firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.643392] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 0.643394] ricoh-mmc: Copyright(c) Philip Langdale
[ 0.650133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.650159] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.650181] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.650184] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.650203] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.650238] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.654112] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.654137] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8704800
[ 0.656365] tg3.c:v3.102 (September 1, 2009)
[ 0.656429] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.656443] tg3 0000:04:00.0: setting latency timer to 64
[ 0.668268] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.668290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.668293] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668295] usb usb1: Product: EHCI Host Controller
[ 0.668296] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.668298] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.668414] usb usb1: configuration #1 chosen from 1 choice
[ 0.668465] hub 1-0:1.0: USB hub found
[ 0.668473] hub 1-0:1.0: 4 ports detected
[ 0.668531] alloc irq_desc for 23 on node -1
[ 0.668533] alloc kstat_irqs on node -1
[ 0.668539] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.668557] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.668560] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.668568] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.668622] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.669268] libata version 3.00 loaded.
[ 0.672513] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.672527] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8704c00
[ 0.673072] sdhci: Secure Digital Host Controller Interface driver
[ 0.673074] sdhci: Copyright(c) Pierre Ossman
[ 0.687757] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.687772] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.687774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687776] usb usb2: Product: EHCI Host Controller
[ 0.687777] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.687779] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.687830] usb usb2: configuration #1 chosen from 1 choice
[ 0.687857] hub 2-0:1.0: USB hub found
[ 0.687863] hub 2-0:1.0: 6 ports detected
[ 0.687912] ahci 0000:00:1f.2: version 3.0
[ 0.687925] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.687972] alloc irq_desc for 30 on node -1
[ 0.687974] alloc kstat_irqs on node -1
[ 0.687985] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 0.688048] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.688051] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.688056] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.688371] scsi0 : ahci
[ 0.688486] scsi1 : ahci
[ 0.688574] scsi2 : ahci
[ 0.688703] ata1: SATA max UDMA/133 abar m2048 at 0xf8704000 port 0xf8704100 irq 30
[ 0.688707] ata2: SATA max UDMA/133 abar m2048 at 0xf8704000 port 0xf8704180 irq 30
[ 0.688710] ata3: SATA max UDMA/133 abar m2048 at 0xf8704000 port 0xf8704200 irq 30
[ 0.688797] ata_piix 0000:00:1f.1: version 2.13
[ 0.688805] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.688839] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.688962] scsi3 : ata_piix
[ 0.689092] scsi4 : ata_piix
[ 0.689190] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.689668] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.689670] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.689691] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.689698] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.689701] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.689715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.689750] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.689846] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.689848] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.689850] usb usb3: Product: UHCI Host Controller
[ 0.689852] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.689853] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.689911] usb usb3: configuration #1 chosen from 1 choice
[ 0.689935] hub 3-0:1.0: USB hub found
[ 0.689941] hub 3-0:1.0: 2 ports detected
[ 0.689986] alloc irq_desc for 21 on node -1
[ 0.689987] alloc kstat_irqs on node -1
[ 0.689992] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.689999] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.690002] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.690008] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.690042] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.690077] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690079] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690081] usb usb4: Product: UHCI Host Controller
[ 0.690083] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.690084] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.690131] usb usb4: configuration #1 chosen from 1 choice
[ 0.690159] hub 4-0:1.0: USB hub found
[ 0.690164] hub 4-0:1.0: 2 ports detected
[ 0.690208] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.690214] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.690218] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.690223] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.690248] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.690279] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690281] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690283] usb usb5: Product: UHCI Host Controller
[ 0.690285] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.690287] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.690334] usb usb5: configuration #1 chosen from 1 choice
[ 0.690357] hub 5-0:1.0: USB hub found
[ 0.690362] hub 5-0:1.0: 2 ports detected
[ 0.690406] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.690413] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.690416] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.690422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.690456] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.690486] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690488] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690490] usb usb6: Product: UHCI Host Controller
[ 0.690492] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.690493] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.690541] usb usb6: configuration #1 chosen from 1 choice
[ 0.690564] hub 6-0:1.0: USB hub found
[ 0.690570] hub 6-0:1.0: 2 ports detected
[ 0.690616] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.690622] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.690626] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.690631] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.690659] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.690689] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690691] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690693] usb usb7: Product: UHCI Host Controller
[ 0.690695] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.690696] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.690743] usb usb7: configuration #1 chosen from 1 choice
[ 0.690769] hub 7-0:1.0: USB hub found
[ 0.690774] hub 7-0:1.0: 2 ports detected
[ 0.719762] firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI version 1.10
[ 0.719810] ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
[ 0.719830] ricoh-mmc: Controller is now disabled.
[ 0.719840] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.719858] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.720904] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.721932] Registered led device: mmc0::
[ 0.722952] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[ 0.884074] ata4.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33
[ 0.915975] ata4.00: configured for UDMA/33
[ 0.985409] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:16:d4:d9:ee:0b
[ 0.985412] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 0.985415] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.985417] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.011723] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.011743] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.011763] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.015313] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.015320] ata1.00: _GTF unexpected object type 0x1
[ 1.018837] ata1.00: ATA-8: SAMSUNG HM160HI, HR100-08, max UDMA7
[ 1.018840] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.022493] ata1.00: _GTF unexpected object type 0x1
[ 1.026030] ata1.00: configured for UDMA/133
[ 1.032011] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.040094] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HR10 PQ: 0 ANSI: 5
[ 1.056378] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5
[ 1.064400] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.064448] sd 0:0:0:0: [sda] Write Protect is off
[ 1.064451] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.064470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.064588] sda: sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.120531] Uniform CD-ROM driver Revision: 3.20
[ 1.120603] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.127619] sda5 sda6 sda7 sda8 sda9 >
[ 1.176222] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.179550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.179587] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.217067] firewire_core: created device fw0: GUID 00023f75bc400b8f, S400
[ 1.278849] usb 1-2: New USB device found, idVendor=04f2, idProduct=b018
[ 1.278853] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.278855] usb 1-2: Product: USB 2.0 Camera
[ 1.278857] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.278858] usb 1-2: SerialNumber: SN0001
[ 1.278938] usb 1-2: configuration #1 chosen from 1 choice
[ 1.520010] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.697659] usb 3-1: New USB device found, idVendor=046d, idProduct=c517
[ 1.697662] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.697664] usb 3-1: Product: USB Receiver
[ 1.697666] usb 3-1: Manufacturer: Logitech
[ 1.697743] usb 3-1: configuration #1 chosen from 1 choice
[ 1.707379] usbcore: registered new interface driver hiddev
[ 1.707533] usbcore: registered new interface driver usbhid
[ 1.707569] usbhid: v2.6:USB HID core driver
[ 1.855255] PM: Starting manual resume from disk
[ 1.855258] PM: Resume from partition 8:8
[ 1.855259] PM: Checking hibernation image.
[ 1.855459] PM: Error -22 checking image file
[ 1.855461] PM: Resume from disk failed.
[ 1.893329] kjournald starting. Commit interval 5 seconds
[ 1.893333] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.727253] udev: starting version 157
[ 4.267205] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.267248] ACPI: Lid Switch [LID0]
[ 4.267293] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.267298] ACPI: Power Button [PWRB]
[ 4.267380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.267383] ACPI: Power Button [PWRF]
[ 4.268539] ACPI: AC Adapter [ACAD] (on-line)
[ 4.289479] ACPI: Battery Slot [BAT1] (battery present)
[ 4.311974] ACPI: SSDT 00000000bf6d9556 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 4.312376] ACPI: SSDT 00000000bf6d9027 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 4.315831] Monitor-Mwait will be used to enter C-1 state
[ 4.315852] Monitor-Mwait will be used to enter C-2 state
[ 4.315870] Monitor-Mwait will be used to enter C-3 state
[ 4.315877] Marking TSC unstable due to TSC halts in idle
[ 4.315904] Switching to clocksource hpet
[ 4.315978] processor LNXCPU:00: registered as cooling_device0
[ 4.322648] ACPI: SSDT 00000000bf6d9812 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 4.322913] ACPI: SSDT 00000000bf6d94d1 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 4.323764] processor LNXCPU:01: registered as cooling_device1
[ 4.411315] ACPI: WMI: Mapper loaded
[ 4.607986] compal-laptop: Identified laptop model 'FL91/IFL91'.
[ 4.608147] compal-laptop: driver 0.2.6 successfully loaded.
[ 4.651915] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.781706] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input6
[ 4.781767] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 4.810985] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.815357] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 4.816043] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input7
[ 4.816175] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 5.007415] elantech.c: assuming hardware version 1, firmware version 2.4
[ 5.057710] cfg80211: Using static regulatory domain info
[ 5.057713] cfg80211: Regulatory domain: US
[ 5.057714] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.057716] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 5.057719] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.057721] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.057723] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.057725] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.057728] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 5.057734] cfg80211: Calling CRDA for country: US
[ 5.102867] elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64.
[ 5.242462] [drm] Initialized drm 1.1.0 20060810
[ 5.411950] Linux video capture interface: v2.00
[ 5.859429] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[ 5.859652] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.859657] i915 0000:00:02.0: setting latency timer to 64
[ 5.869780] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[ 5.871398] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 5.871446] usbcore: registered new interface driver uvcvideo
[ 5.871449] USB Video Class driver (v0.1.0)
[ 5.877201] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 5.877204] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.877524] alloc irq_desc for 31 on node -1
[ 5.877527] alloc kstat_irqs on node -1
[ 5.877536] i915 0000:00:02.0: irq 31 for MSI/MSI-X
[ 5.877542] [drm] set up 7M of stolen space
[ 6.002642] [drm] initialized overlay support
[ 6.410664] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 6.410666] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 6.410742] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.410756] iwl3945 0000:0c:00.0: setting latency timer to 64
[ 6.478917] iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 6.478920] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 6.479033] alloc irq_desc for 32 on node -1
[ 6.479035] alloc kstat_irqs on node -1
[ 6.479067] iwl3945 0000:0c:00.0: irq 32 for MSI/MSI-X
[ 6.521138] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.798652] Console: switching to colour frame buffer device 160x50
[ 6.801123] fb0: inteldrmfb frame buffer device
[ 6.801124] registered panic notifier
[ 6.827770] acpi device:07: registered as cooling_device2
[ 6.827965] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 6.828024] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.828054] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.461319] alloc irq_desc for 20 on node -1
[ 7.461322] alloc kstat_irqs on node -1
[ 7.461330] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.461379] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.596389] hda_codec: ALC268: BIOS auto-probing.
[ 7.596911] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 8.477487] Adding 4883720k swap on /dev/sda8. Priority:-1 extents:1 across:4883720k
[ 8.722375] EXT3 FS on sda9, internal journal
[ 8.873923] loop: module loaded
[ 9.232376] kjournald starting. Commit interval 5 seconds
[ 9.232588] EXT3 FS on sda7, internal journal
[ 9.232595] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.666388] iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 10.777292] fuse init (API version 7.13)
[ 10.792297] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
[ 10.860725] Registered led device: iwl-phy0::radio
[ 10.860831] Registered led device: iwl-phy0::assoc
[ 10.860859] Registered led device: iwl-phy0::RX
[ 10.860887] Registered led device: iwl-phy0::TX
[ 10.875837] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.358617] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 12.471350] RPC: Registered udp transport module.
[ 12.471352] RPC: Registered tcp transport module.
[ 12.471353] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.567781] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 12.737037] svc: failed to register lockdv1 RPC service (errno 97).
[ 12.737881] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 12.780020] NFSD: starting 90-second grace period
[ 15.079004] alloc irq_desc for 33 on node -1
[ 15.079007] alloc kstat_irqs on node -1
[ 15.079037] tg3 0000:04:00.0: irq 33 for MSI/MSI-X
[ 15.112477] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.786187] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 16.786190] tg3: eth0: Flow control is off for TX and off for RX.
[ 16.786650] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.353559] Bluetooth: Core ver 2.15
[ 17.353605] NET: Registered protocol family 31
[ 17.353606] Bluetooth: HCI device and connection manager initialized
[ 17.353609] Bluetooth: HCI socket layer initialized
[ 17.442557] Bluetooth: L2CAP ver 2.14
[ 17.442559] Bluetooth: L2CAP socket layer initialized
[ 17.533943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.533945] Bluetooth: BNEP filters: protocol multicast
[ 17.594564] Bridge firewalling registered
[ 17.635167] Bluetooth: RFCOMM TTY layer initialized
[ 17.635171] Bluetooth: RFCOMM socket layer initialized
[ 17.635173] Bluetooth: RFCOMM ver 1.11
[ 18.650563] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.650565] Bluetooth: SCO socket layer initialized
[ 19.893425] lp: driver loaded but no devices found
[ 19.928373] ppdev: user-space parallel port driver
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 29932 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/pkg-acpi-devel/attachments/20100630/c538df18/attachment-0001.bin>
More information about the Pkg-acpi-devel
mailing list