[Pkg-alsa-devel] Bug#476711: [alsa-base] ACER Travelmate 6292 - no sound

[Marco Righi]

Package: alsa-base
Version: 1.0.16-1.1
Severity: grave

--- Please enter the report below this line. ---
The following lines are the output of the "alsaconf" command.

Terminating processes: 4813 5527 10900 10915 10927 (with SIGKILL:) 10939
(failed: processes still using sound devices: 10951(arecord)).
/usr/sbin/alsa: Warning: Processes using sound devices: 10951(arecord).
Unloading ALSA sound driver modules: snd-hda-intel snd-pcm snd-timer
snd-page-alloc (failed: modules still loaded: snd-hda-intel snd-pcm
snd-timer snd-page-alloc).
Building card database...

Searching sound cards                │
                   │  ┌────────────────────────────────┐  │
                   │  │               97%              │


Soundcard Selection─────────────────────────────┐
 │
    │
 │          Following card(s) are found on your system.
    │
 │          Choose a soundcard to configure:
    │
 │
┌──────────────────────────────────────────────────────────────────────┐ │
 │ │hda-intel  Intel Corporation 82801H (ICH8 Family) HD Audio
Controller │ │
 │ │legacy     Probe legacy ISA (non-PnP) chips


======> After press OK button over hda-intel



Configuring snd-hda-intel                      │
              │ Do you want to modify /etc/modprobe.d/sound    │
              │ (and /etc/modprobe.conf if present)?



======> my answer was yes


K, sound driver is configured.                     │
         │                                                          │
         │                   ALSA  CONFIGURATOR                     │
         │                                                          │
         │           will prepare the card for playing now.         │
         │                                                          │
         │      Now I'll run alsasound init script, then I'll use   │
         │      amixer to raise the default volumes.                │
         │      You can change the volume later via a mixer         │
         │      program such as alsamixer or gamix.


Loading driver...
Setting default volumes...
amixer: Mixer default load error: Invalid argument


===============================================================================

 Now ALSA is ready to use.
 For adjustment of volumes, use your favorite mixer.

 Have a lot of fun!


With the previous kernel (vmlinuz-2.6.22-3-vserver-686) I have not this
error, the Kmix show me the sound card but I have no sound....

Thanks in advandce
Marco Righi

--- System information. ---
Architecture: i386
Kernel:       Linux 2.6.24-1-686

Debian Release: lenny/sid
  500 testing         www.debian-multimedia.org
  500 testing         security.debian.org
  500 testing         ftp.it.debian.org

--- Package information. ---
Depends                (Version) | Installed
================================-+-===========
linux-sound-base                 | 1.0.16-1.1
lsof                   (>= 4.64) | 4.78.dfsg.1-4
module-init-tools     (>= 3.2.1) | 3.4-1