Bug#567393: grub-pc: Blank console during boot
Sven Arvidsson
sa at whiz.se
Thu Jan 28 22:19:22 UTC 2010
I'm attaching full dmesg output in case that's helpful.
--
Cheers,
Sven Arvidsson
http://www.whiz.se
PGP Key ID 760BDD22
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686-bigmem (Debian 2.6.32-5) (ben at decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 07:12:17 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7d80000 (usable)
[ 0.000000] BIOS-e820: 00000000c7d80000 - 00000000c7d8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7d8e000 - 00000000c7dd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7dd0000 - 00000000c7e00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 0C7E00000 mask FFFE00000 uncachable
[ 0.000000] 6 base 0C8000000 mask FF8000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037600000 page 2M
[ 0.000000] 0037600000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000
[ 0.000000] RAMDISK: 37839000 - 37feff2f
[ 0.000000] Allocated new RAMDISK: 00100000 - 008b6f2f
[ 0.000000] Move RAMDISK from 0000000037839000 - 0000000037feff2e to 00100000 - 008b6f2e
[ 0.000000] ACPI: RSDP 000fb900 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT c7d80000 00044 (v01 A_M_I_ OEMRSDT 07000908 MSFT 00000097)
[ 0.000000] ACPI: FACP c7d80200 00084 (v02 A_M_I_ OEMFACP 07000908 MSFT 00000097)
[ 0.000000] ACPI: DSDT c7d80440 090EB (v01 A0982 A0982070 00000070 INTL 20060113)
[ 0.000000] ACPI: FACS c7d8e000 00040
[ 0.000000] ACPI: APIC c7d80390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097)
[ 0.000000] ACPI: MCFG c7d80400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097)
[ 0.000000] ACPI: OEMB c7d8e040 00089 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097)
[ 0.000000] ACPI: HPET c7d89530 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097)
[ 0.000000] ACPI: GSCI c7d8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097)
[ 0.000000] ACPI: OSFR c7d89570 000B0 (v01 A_M_I_ OEMOSFR 07000908 MSFT 00000097)
[ 0.000000] ACPI: SSDT c7d90b50 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3976MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00014000 - 0001af00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cab34] TEXT DATA BSS ==> [0001000000 - 00014cab34]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [00014cb000 - 00014d7224] BRK ==> [00014cb000 - 00014d7224]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000100000 - 00008b6f2f] NEW RAMDISK ==> [0000100000 - 00008b6f2f]
[ 0.000000] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000c7d80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1015054
[ 0.000000] free_area_init_node: node 0, pgdat c13aa5a0, node_mem_map c14d9200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7953 pages used for memmap
[ 0.000000] HighMem zone: 779889 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c7e00000 (gap: c7e00000:37000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3c00000 s37432 r0 d24008 u524288
[ 0.000000] pcpu-alloc: s37432 r0 d24008 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1005325
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686-bigmem root=UUID=ebf99f0b-d7aa-418b-b701-79c60a34dfed ro quiet video=i915:modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:00130000)
[ 0.000000] Memory: 4006200k/4980736k available (2482k kernel code, 52912k reserved, 1309k data, 380k init, 3151368k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13b4000 - 0xc1413000 ( 380 kB)
[ 0.000000] .data : 0xc126c925 - 0xc13b3e68 (1309 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126c925 (2482 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.259 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.51 BogoMIPS (lpj=12001036)
[ 0.004013] Security Framework initialized
[ 0.004017] SELinux: Disabled at boot.
[ 0.004021] Mount-cache hash table entries: 512
[ 0.004105] Initializing cgroup subsys ns
[ 0.004107] Initializing cgroup subsys cpuacct
[ 0.004110] Initializing cgroup subsys devices
[ 0.004111] Initializing cgroup subsys freezer
[ 0.004113] Initializing cgroup subsys net_cls
[ 0.004127] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004128] CPU: L2 cache: 6144K
[ 0.004130] CPU: Physical Processor ID: 0
[ 0.004131] CPU: Processor Core ID: 0
[ 0.004134] mce: CPU supports 6 MCE banks
[ 0.004139] CPU0: Thermal monitoring enabled (TM2)
[ 0.004141] using mwait in idle threads.
[ 0.004145] Performance Events: Core2 events, Intel PMU driver.
[ 0.004149] ... version: 2
[ 0.004150] ... bit width: 40
[ 0.004151] ... generic registers: 2
[ 0.004152] ... value mask: 000000ffffffffff
[ 0.004153] ... max period: 000000007fffffff
[ 0.004154] ... fixed-purpose events: 3
[ 0.004155] ... event mask: 0000000700000003
[ 0.004158] Checking 'hlt' instruction... OK.
[ 0.020893] ACPI: Core revision 20090903
[ 0.032333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073539] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 5999.22 BogoMIPS (lpj=11998448)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164107] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.164113] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168040] Brought up 2 CPUs
[ 0.168041] Total of 2 processors activated (11999.74 BogoMIPS).
[ 0.168771] CPU0 attaching sched-domain:
[ 0.168773] domain 0: span 0-1 level MC
[ 0.168775] groups: 0 1
[ 0.168778] CPU1 attaching sched-domain:
[ 0.168780] domain 0: span 0-1 level MC
[ 0.168781] groups: 1 0
[ 0.168886] devtmpfs: initialized
[ 0.169136] regulator: core version 0.5
[ 0.169169] NET: Registered protocol family 16
[ 0.169224] ACPI: bus type pci registered
[ 0.169272] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.169273] PCI: Not using MMCONFIG.
[ 0.169383] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.169384] PCI: Using configuration type 1 for base access
[ 0.169615] bio: create slab <bio-0> at 0
[ 0.170147] ACPI: EC: Look up EC in DSDT
[ 0.171865] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179624] ACPI: Interpreter enabled
[ 0.179632] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.179646] ACPI: Using IOAPIC for interrupt routing
[ 0.179682] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.181616] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.181618] PCI: Using MMCONFIG for extended config space
[ 0.186937] ACPI Warning: Incorrect checksum in table [OEMB] - 0C, should be 0B (20090903/tbutils-314)
[ 0.187715] ACPI: No dock devices found.
[ 0.187828] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.187883] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
[ 0.187887] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.187890] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
[ 0.187915] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
[ 0.187981] pci 0000:00:1a.0: reg 20 io port: [0xd480-0xd49f]
[ 0.188041] pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
[ 0.188095] pci 0000:00:1a.2: reg 20 io port: [0xd880-0xd89f]
[ 0.188151] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fb000-0xfe8fb3ff]
[ 0.188195] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.188199] pci 0000:00:1a.7: PME# disabled
[ 0.188230] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
[ 0.188262] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.188264] pci 0000:00:1b.0: PME# disabled
[ 0.188311] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.188314] pci 0000:00:1c.0: PME# disabled
[ 0.188365] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.188368] pci 0000:00:1c.5: PME# disabled
[ 0.188410] pci 0000:00:1d.0: reg 20 io port: [0xd000-0xd01f]
[ 0.188463] pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
[ 0.188518] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[ 0.188575] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8fa000-0xfe8fa3ff]
[ 0.188618] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.188621] pci 0000:00:1d.7: PME# disabled
[ 0.188719] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.188722] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.188724] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.188775] pci 0000:00:1f.2: reg 10 io port: [0xc880-0xc887]
[ 0.188780] pci 0000:00:1f.2: reg 14 io port: [0xc800-0xc803]
[ 0.188784] pci 0000:00:1f.2: reg 18 io port: [0xc480-0xc487]
[ 0.188788] pci 0000:00:1f.2: reg 1c io port: [0xc400-0xc403]
[ 0.188793] pci 0000:00:1f.2: reg 20 io port: [0xc080-0xc09f]
[ 0.188797] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe8f8000-0xfe8f87ff]
[ 0.188820] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188823] pci 0000:00:1f.2: PME# disabled
[ 0.188844] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8f9000-0xfe8f90ff]
[ 0.188855] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.188902] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.188940] pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.188957] pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
[ 0.188968] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xfdef0000-0xfdefffff]
[ 0.188975] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff]
[ 0.189008] pci 0000:01:00.0: supports D1 D2
[ 0.189010] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189014] pci 0000:01:00.0: PME# disabled
[ 0.189058] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
[ 0.189061] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.189065] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.189095] pci 0000:03:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[ 0.189132] pci 0000:03:03.0: supports D1 D2
[ 0.189133] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.189136] pci 0000:03:03.0: PME# disabled
[ 0.189170] pci 0000:00:1e.0: transparent bridge
[ 0.189174] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.189188] pci_bus 0000:00: on NUMA node 0
[ 0.189191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.189307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.189364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.189412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.200730] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.200809] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.200889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.200967] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.201047] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.201128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.201207] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.201285] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.201346] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.201353] vgaarb: loaded
[ 0.201388] PCI: Using ACPI for IRQ routing
[ 0.201492] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.201496] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.204008] Switching to clocksource tsc
[ 0.204856] pnp: PnP ACPI init
[ 0.204862] ACPI: bus type pnp registered
[ 0.206914] pnp: PnP ACPI: found 15 devices
[ 0.206916] ACPI: ACPI bus type pnp unregistered
[ 0.206918] PnPBIOS: Disabled by ACPI PNP
[ 0.206924] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.206929] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.206933] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.206935] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.206937] system 00:07: ioport range 0x500-0x57f could not be reserved
[ 0.206939] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.206942] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.206944] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.206946] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.206950] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.206954] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.206956] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.206960] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.206965] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.206967] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.206969] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.206971] system 00:0e: iomem range 0x100000-0xc7dfffff could not be reserved
[ 0.206973] system 00:0e: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.241589] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.241591] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.241595] pci 0000:00:1c.0: MEM window: 0xc8000000-0xc83fffff
[ 0.241598] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.241603] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
[ 0.241605] pci 0000:00:1c.5: IO window: 0xe000-0xefff
[ 0.241609] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff
[ 0.241612] pci 0000:00:1c.5: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.241616] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.241617] pci 0000:00:1e.0: IO window: disabled
[ 0.241621] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.241623] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.241630] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.241635] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.241638] pci 0000:00:1c.0: setting latency timer to 64
[ 0.241644] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.241647] pci 0000:00:1c.5: setting latency timer to 64
[ 0.241651] pci 0000:00:1e.0: setting latency timer to 64
[ 0.241654] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.241655] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.241657] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.241659] pci_bus 0000:02: resource 1 mem: [0xc8000000-0xc83fffff]
[ 0.241661] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.241662] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.241664] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.241665] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.241667] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.241669] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.241670] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.241686] NET: Registered protocol family 2
[ 0.241734] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.241897] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.242121] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.242233] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.242235] TCP reno registered
[ 0.242274] NET: Registered protocol family 1
[ 0.242283] pci 0000:00:02.0: Boot video device
[ 0.242396] Unpacking initramfs...
[ 0.388078] Freeing initrd memory: 7899k freed
[ 0.390466] audit: initializing netlink socket (disabled)
[ 0.390477] type=2000 audit(1264710797.387:1): initialized
[ 0.390803] highmem bounce pool size: 64 pages
[ 0.390806] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391704] VFS: Disk quotas dquot_6.5.2
[ 0.391738] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.391846] msgmni has been set to 1687
[ 0.391964] alg: No test for stdrng (krng)
[ 0.391995] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.391998] io scheduler noop registered
[ 0.391999] io scheduler anticipatory registered
[ 0.392000] io scheduler deadline registered
[ 0.392024] io scheduler cfq registered (default)
[ 0.392111] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.392118] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.392201] pcieport 0000:00:1c.5: irq 25 for MSI/MSI-X
[ 0.392206] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.392312] efifb: probing for efifb
[ 0.392356] efifb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1200k, total 1200k
[ 0.392358] efifb: mode is 640x480x32, linelength=2560, pages=1
[ 0.392359] efifb: scrolling: redraw
[ 0.392361] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.399891] Console: switching to colour frame buffer device 80x30
[ 0.407350] fb0: EFI VGA frame buffer device
[ 0.407366] isapnp: Scanning for PnP cards...
[ 0.760119] isapnp: No Plug & Play device found
[ 0.760984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.761066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.761319] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.761422] PNP: No PS/2 controller found. Probing ports directly.
[ 0.764184] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764188] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.764220] mice: PS/2 mouse device common for all mice
[ 0.764236] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.764252] rtc_cmos 00:03: RTC can wake from S4
[ 0.764272] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.764292] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.764301] cpuidle: using governor ladder
[ 0.764302] cpuidle: using governor menu
[ 0.764305] No iBFT detected.
[ 0.764511] TCP cubic registered
[ 0.764599] NET: Registered protocol family 10
[ 0.764882] lo: Disabled Privacy Extensions
[ 0.765071] Mobile IPv6
[ 0.765072] NET: Registered protocol family 17
[ 0.765084] Using IPI No-Shortcut mode
[ 0.765124] registered taskstats version 1
[ 0.765393] rtc_cmos 00:03: setting system clock to 2010-01-28 20:33:18 UTC (1264710798)
[ 0.765427] Freeing unused kernel memory: 380k freed
[ 0.765537] Write protecting the kernel text: 2484k
[ 0.765556] Write protecting the kernel read-only data: 888k
[ 0.828225] Linux agpgart interface v0.103
[ 0.829731] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[ 0.830970] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 0.832922] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.840171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.840175] ACPI: Power Button [PWRB]
[ 0.840207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.840210] ACPI: Power Button [PWRF]
[ 0.849980] [drm] Initialized drm 1.1.0 20060810
[ 0.860742] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.860745] i915 0000:00:02.0: setting latency timer to 64
[ 0.865072] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 0.865074] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 0.865117] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 0.865120] [drm] set up 127M of stolen space
[ 1.149807] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 1.150148] fb1: inteldrmfb frame buffer device
[ 1.150150] registered panic notifier
[ 1.150183] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.224817] usbcore: registered new interface driver usbfs
[ 1.224834] usbcore: registered new interface driver hub
[ 1.227165] firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.235630] usbcore: registered new device driver usb
[ 1.238327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.238348] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.238359] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.238362] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.238377] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.238397] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.240264] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.240276] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.240308] r8169 0000:01:00.0: setting latency timer to 64
[ 1.240364] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
[ 1.240747] eth0: RTL8168c/8111c at 0xf94f8000, 00:22:15:8a:83:5f, XID 1c4000c0 IRQ 27
[ 1.242288] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.243415] SCSI subsystem initialized
[ 1.253048] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fb000
[ 1.259337] libata version 3.00 loaded.
[ 1.268008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.268029] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.268032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268034] usb usb1: Product: EHCI Host Controller
[ 1.268036] usb usb1: Manufacturer: Linux 2.6.32-trunk-686-bigmem ehci_hcd
[ 1.268039] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.268107] usb usb1: configuration #1 chosen from 1 choice
[ 1.268139] hub 1-0:1.0: USB hub found
[ 1.268145] hub 1-0:1.0: 6 ports detected
[ 1.268190] ahci 0000:00:1f.2: version 3.0
[ 1.268200] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.268228] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.268258] ahci: SSS flag set, parallel bus scan disabled
[ 1.268285] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.268288] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.268291] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.296006] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
[ 1.308035] scsi0 : ahci
[ 1.308151] scsi1 : ahci
[ 1.308224] scsi2 : ahci
[ 1.308281] scsi3 : ahci
[ 1.308339] scsi4 : ahci
[ 1.308395] scsi5 : ahci
[ 1.308499] ata1: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8100 irq 28
[ 1.308502] ata2: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8180 irq 28
[ 1.308504] ata3: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8200 irq 28
[ 1.308506] ata4: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8280 irq 28
[ 1.308508] ata5: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8300 irq 28
[ 1.308510] ata6: SATA max UDMA/133 abar m2048 at 0xfe8f8000 port 0xfe8f8380 irq 28
[ 1.308574] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.308583] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.308585] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.308592] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.308608] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.312496] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.312504] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fa000
[ 1.328005] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.328020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.328023] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.328025] usb usb2: Product: EHCI Host Controller
[ 1.328027] usb usb2: Manufacturer: Linux 2.6.32-trunk-686-bigmem ehci_hcd
[ 1.328029] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.328084] usb usb2: configuration #1 chosen from 1 choice
[ 1.328109] hub 2-0:1.0: USB hub found
[ 1.328114] hub 2-0:1.0: 6 ports detected
[ 1.336858] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.336874] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.336879] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.336881] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.336886] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.336910] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480
[ 1.336930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.336933] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.336934] usb usb3: Product: UHCI Host Controller
[ 1.336936] usb usb3: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.336937] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.336975] usb usb3: configuration #1 chosen from 1 choice
[ 1.336992] hub 3-0:1.0: USB hub found
[ 1.336996] hub 3-0:1.0: 2 ports detected
[ 1.337028] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.337032] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.337034] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.337039] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.337062] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 1.337082] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.337084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337085] usb usb4: Product: UHCI Host Controller
[ 1.337087] usb usb4: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.337088] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.337124] usb usb4: configuration #1 chosen from 1 choice
[ 1.337142] hub 4-0:1.0: USB hub found
[ 1.337146] hub 4-0:1.0: 2 ports detected
[ 1.337177] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.337180] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.337183] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.337187] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.337205] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d880
[ 1.337225] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.337227] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337229] usb usb5: Product: UHCI Host Controller
[ 1.337230] usb usb5: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.337231] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.337266] usb usb5: configuration #1 chosen from 1 choice
[ 1.337285] hub 5-0:1.0: USB hub found
[ 1.337289] hub 5-0:1.0: 2 ports detected
[ 1.337320] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.337323] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.337326] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.337331] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.337349] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
[ 1.337371] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.337373] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337375] usb usb6: Product: UHCI Host Controller
[ 1.337376] usb usb6: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.337378] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.337412] usb usb6: configuration #1 chosen from 1 choice
[ 1.337430] hub 6-0:1.0: USB hub found
[ 1.337434] hub 6-0:1.0: 2 ports detected
[ 1.337461] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.337465] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.337468] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.337472] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.337489] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 1.337509] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.337511] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337513] usb usb7: Product: UHCI Host Controller
[ 1.337514] usb usb7: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.337516] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.337554] usb usb7: configuration #1 chosen from 1 choice
[ 1.337572] hub 7-0:1.0: USB hub found
[ 1.337577] hub 7-0:1.0: 2 ports detected
[ 1.337605] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.337609] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.337611] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.337617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.337635] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 1.337654] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.337657] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.337658] usb usb8: Product: UHCI Host Controller
[ 1.337659] usb usb8: Manufacturer: Linux 2.6.32-trunk-686-bigmem uhci_hcd
[ 1.337661] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.337697] usb usb8: configuration #1 chosen from 1 choice
[ 1.337715] hub 8-0:1.0: USB hub found
[ 1.337719] hub 8-0:1.0: 2 ports detected
[ 1.752009] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 1.796053] firewire_core: created device fw0: GUID 001e8c00016fc3c7, S400
[ 1.800012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.800239] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 1.800242] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.800519] ata1.00: configured for UDMA/133
[ 1.816090] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.884322] usb 2-2: New USB device found, idVendor=058f, idProduct=6254
[ 1.884325] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.884376] usb 2-2: configuration #1 chosen from 1 choice
[ 1.884476] hub 2-2:1.0: USB hub found
[ 1.884568] hub 2-2:1.0: 4 ports detected
[ 2.052008] usb 2-6: new high speed USB device using ehci_hcd and address 5
[ 2.192634] usb 2-6: New USB device found, idVendor=05ac, idProduct=1006
[ 2.192637] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.192640] usb 2-6: Product: Keyboard Hub
[ 2.192641] usb 2-6: Manufacturer: Apple, Inc.
[ 2.192643] usb 2-6: SerialNumber: 000000000000
[ 2.192687] usb 2-6: configuration #1 chosen from 1 choice
[ 2.192847] hub 2-6:1.0: USB hub found
[ 2.192881] hub 2-6:1.0: 3 ports detected
[ 2.432007] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.704010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.705972] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[ 2.705975] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.708028] ata2.00: configured for UDMA/133
[ 2.724067] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 2.809080] usb 6-1: New USB device found, idVendor=0a12, idProduct=0001
[ 2.809083] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.809085] usb 6-1: Product: BT2.0
[ 2.809135] usb 6-1: configuration #1 chosen from 1 choice
[ 3.052007] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 3.226281] usb 8-1: New USB device found, idVendor=046d, idProduct=c50e
[ 3.226284] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.226287] usb 8-1: Product: USB RECEIVER
[ 3.226288] usb 8-1: Manufacturer: Logitech
[ 3.226339] usb 8-1: configuration #1 chosen from 1 choice
[ 3.316170] usb 2-2.1: new high speed USB device using ehci_hcd and address 6
[ 3.426262] usb 2-2.1: New USB device found, idVendor=058f, idProduct=6362
[ 3.426265] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.426268] usb 2-2.1: Product: Mass Storage Device
[ 3.426270] usb 2-2.1: Manufacturer: Generic
[ 3.426272] usb 2-2.1: SerialNumber: 058F312D81B
[ 3.426327] usb 2-2.1: configuration #1 chosen from 1 choice
[ 3.430910] Initializing USB Mass Storage driver...
[ 3.430969] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.431014] usb-storage: device found at 6
[ 3.431016] usb-storage: waiting for device to settle before scanning
[ 3.431021] usbcore: registered new interface driver usb-storage
[ 3.431023] USB Mass Storage support registered.
[ 3.496130] usb 2-6.2: new low speed USB device using ehci_hcd and address 7
[ 3.594354] usb 2-6.2: New USB device found, idVendor=05ac, idProduct=0221
[ 3.594356] usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.594359] usb 2-6.2: Product: Apple Keyboard
[ 3.594361] usb 2-6.2: Manufacturer: Apple, Inc
[ 3.594413] usb 2-6.2: configuration #1 chosen from 1 choice
[ 3.598364] usbcore: registered new interface driver hiddev
[ 3.612011] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.612858] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100, ATAPI AN
[ 3.614054] ata3.00: configured for UDMA/100
[ 3.616463] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 3.616522] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1/input0
[ 3.616574] usbcore: registered new interface driver usbhid
[ 3.616576] usbhid: v2.6:USB HID core driver
[ 3.621076] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input3
[ 3.621109] apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input0
[ 3.624139] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input4
[ 3.624197] apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input1
[ 3.628643] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5
[ 3.948012] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.284011] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.188010] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.195841] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 5.195844] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.197845] ata6.00: configured for UDMA/133
[ 5.212070] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 5.217349] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.217375] sd 0:0:0:0: [sda] Write Protect is off
[ 5.217377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.217390] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.217462] sda: sda1
[ 5.217761] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.219113] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.219138] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.219139] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.219153] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.219217] sdb:
[ 5.219281] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.219361] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.219363] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.219376] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.219446] sdc: sdc1
[ 5.223489] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 5.260792] sdb1
[ 5.260949] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.266168] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.266171] Uniform CD-ROM driver Revision: 3.20
[ 5.266241] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.268961] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.268981] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.269000] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 5.269017] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 5.577473] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.767827] udev: starting version 150
[ 5.805197] ACPI: SSDT c7d90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 5.805533] ACPI: SSDT c7d90600 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 5.815838] Monitor-Mwait will be used to enter C-1 state
[ 5.818557] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.819347] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.819351] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 5.819718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.827551] Monitor-Mwait will be used to enter C-2 state
[ 5.843019] Monitor-Mwait will be used to enter C-3 state
[ 5.843025] Marking TSC unstable due to TSC halts in idle
[ 5.843100] processor LNXCPU:00: registered as cooling_device0
[ 5.843468] ACPI: SSDT c7d90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 5.843690] ACPI: SSDT c7d90ac0 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 5.858563] Switching to clocksource hpet
[ 5.886551] processor LNXCPU:01: registered as cooling_device1
[ 5.918996] Bluetooth: Core ver 2.15
[ 5.920082] NET: Registered protocol family 31
[ 5.920083] Bluetooth: HCI device and connection manager initialized
[ 5.920085] Bluetooth: HCI socket layer initialized
[ 5.924017] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.924077] usbcore: registered new interface driver btusb
[ 5.958102] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.958129] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.057815] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.182558] loop: module loaded
[ 6.304286] EXT4-fs (sdc1): mounted filesystem with ordered data mode
[ 6.383387] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 6.483496] fuse init (API version 7.13)
[ 6.770182] Bluetooth: L2CAP ver 2.14
[ 6.770184] Bluetooth: L2CAP socket layer initialized
[ 6.780588] Bluetooth: RFCOMM TTY layer initialized
[ 6.780591] Bluetooth: RFCOMM socket layer initialized
[ 6.780592] Bluetooth: RFCOMM ver 1.11
[ 6.797982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.797984] Bluetooth: BNEP filters: protocol multicast
[ 6.807491] Bridge firewalling registered
[ 6.816765] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.816767] Bluetooth: SCO socket layer initialized
[ 6.846924] r8169: eth0: link up
[ 6.846928] r8169: eth0: link up
[ 6.853133] lp: driver loaded but no devices found
[ 6.861446] ppdev: user-space parallel port driver
[ 7.274941] [drm] TMDS-8: set mode 1680x1050 24
[ 8.432016] usb-storage: device scan complete
[ 8.439824] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 8.440449] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 8.440946] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 8.441442] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 8.441713] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 8.441793] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 8.441866] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 8.441946] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 8.453811] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 8.454439] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 8.456813] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 8.457475] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 15.883824] CPU0 attaching NULL sched-domain.
[ 15.883827] CPU1 attaching NULL sched-domain.
[ 15.900563] CPU0 attaching sched-domain:
[ 15.900566] domain 0: span 0-1 level MC
[ 15.900569] groups: 0 1
[ 15.900573] CPU1 attaching sched-domain:
[ 15.900575] domain 0: span 0-1 level MC
[ 15.900577] groups: 1 0
[ 17.704012] eth0: no IPv6 routers present
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.alioth.debian.org/pipermail/pkg-grub-devel/attachments/20100128/1e3dce9c/attachment-0001.pgp>
More information about the Pkg-grub-devel
mailing list