[Pkg-libburnia-devel] Bug#800338: wodim: cant write/read using internal DVD GT34N for spesific DVD disc
Brianajie W
brianajie.w at gmail.com
Wed Sep 30 04:12:22 UTC 2015
Dear Sir Thomas,
both of command was failed to burn file into disk. there's the logs :
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -sao
dota1.iso
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 1 burn_disc_blank "The drive holds a
blank disc"
Current: DVD-R sequential recording
Track 01: data 4480 MB
Total size: 4480 MB (509:51.91) = 2294244 sectors
Lout start: 4480 MB (509:53/91) = 2294394 sectors
Starting to write CD/DVD at speed MAX in real SAO mode
for single session.
Last chance to quit, starting real write in 0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0
cdrskin: thank you for being patient for 24 seconds
cdrskin: FATAL : SCSI error on write(0,16): See MMC
specs: Sense Key 3 "Medium error", ASC 0C ASCQ 80.
cdrskin: thank you for being patient for 25
seconds
Track 01: Total bytes read/written: 32768/0 (0 sectors).
Writing time: 25.458s
Cdrskin: fifo had 2095 puts and 47 gets.
Cdrskin: fifo was 0 times empty and 0 times full, min
fill was 100%.
Min drive buffer fill was 50%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -tao
dota1.iso
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an
incomplete disc in the drive"
Current: DVD-R sequential recording
Track 01: data 4480 MB
Total size: 4480 MB (509:51.91) = 2294244 sectors
Lout start: 4480 MB (509:53/91) = 2294394 sectors
cdrskin: FATAL : predicted session size 2294244s does
not fit on media (3616s)
cdrskin: HINT : This test may be disabled by option
-force
cdrskin: burning failed
cdrskin: FATAL : burning failed.
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -sao
dota2b
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an
incomplete disc in the drive"
Current: DVD-R sequential recording
cdrskin: SORRY : Write job parameters are unsuitable
cdrskin: SORRY : Write job parameters are unsuitable
cdrskin: Reason: SAO: write type SAO works only on blank
media,
cdrskin: Media : appendable DVD-R sequential recording
cdrskin: burning failed
cdrskin: FATAL : burning failed.
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -tao
dota2b
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an
incomplete disc in the drive"
Current: DVD-R sequential recording
Track 01: data 952 MB
Total size: 952 MB (108:22.00) = 487500 sectors
Lout start: 952 MB (108:24/00) = 487650 sectors
cdrskin: FATAL : predicted session size 487500s does not
fit on media (3616s)
cdrskin: HINT : This test may be disabled by option
-force
cdrskin: burning failed
cdrskin: FATAL : burning failed.
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -sao
dota2b
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 1 burn_disc_blank "The drive holds a
blank disc"
Current: DVD-R sequential recording
Track 01: data 952 MB
Total size: 952 MB (108:22.00) = 487500 sectors
Lout start: 952 MB (108:24/00) = 487650 sectors
Starting to write CD/DVD at speed MAX in real SAO mode
for single session.
Last chance to quit, starting real write in 0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0
cdrskin: thank you for being patient for 22 seconds
cdrskin: FATAL : SCSI error on write(0,16): See MMC
specs: Sense Key 3 "Medium error", ASC 0C ASCQ 80.
cdrskin: thank you for being patient for 23
seconds
Track 01: Total bytes read/written: 32768/0 (0 sectors).
Writing time: 23.530s
Cdrskin: fifo had 2095 puts and 47 gets.
Cdrskin: fifo was 0 times empty and 0 times full, min
fill was 100%.
Min drive buffer fill was 50%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
brianajie at heavenbox:~/tmp$ cdrskin -v dev=/dev/sr0 -tao
dota2b
cdrskin 1.3.2 : limited cdrecord compatibility wrapper
for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given
dev='/dev/sr0'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an
incomplete disc in the drive"
Current: DVD-R sequential recording
Track 01: data 952 MB
Total size: 952 MB (108:22.00) = 487500 sectors
Lout start: 952 MB (108:24/00) = 487650 sectors
Starting to write CD/DVD at speed MAX in real TAO mode
for single session.
Last chance to quit, starting real write in 0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 487520
cdrskin: FATAL : SCSI error on write(487520,16): [5 21
02] Illegal request. Invalid address for write.
Fixating...
cdrskin: working post-track (burning since 14 seconds)
cdrskin: FAILURE : Failed to close session (2). SCSI
error : See MMC specs: Sense Key 3 "Medium error", ASC
0C ASCQ 80.
Track 01: Total bytes read/written: 32768/0 (0 sectors).
Writing time: 14.655s
Cdrskin: fifo had 2095 puts and 47 gets.
Cdrskin: fifo was 0 times empty and 0 times full, min
fill was 100%.
Min drive buffer fill was 50%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
the first -tao/-sao command and the next was different disc (2 DVD-R
disc used) and both was failed with the messages.
yesterday, I tried again with the CDRW disc and DVDRW disc to makes sure
that not drive failure and both disc works flawlessly.
then, maybe i got the bad disc manufacture, i'll try get another DVD
disc (even with USB DVD drive was successful).
another suggestion sir?
thanks for your suggestion and kindness,
Best regards,
Brianajie W.
Pada hari Senin, tanggal 28/09/2015, pukul 14:02 +0200, Thomas Schmitt
menulis:
> Hi,
>
> > The DVD drive was built-in with my laptop. My Laptop was
> > ASUS N43SL built on 2011.
>
> Old enough for a drive to go blind.
>
>
> > the external USB DVDRW can read and write correctly.
>
> So it's not the fault of the software alone.
>
>
> > > "spesific format DVD" riddles me.
>
> > I meant that specific brand, I'm sorry if i did mis-typing...
> > because that I can read/write my DVD-RW disc correctly, so I suppoused that
> > brand-based
>
> It might really be about manufacturers. (Brands are not
> very reliable indicators about the real factory which made
> a DVD-R medium.)
> It might well be about the difference between DVD-R and
> DVD-RW, which use different chemicals to react on laser beams.
> (Normally it's DVD-RW which fail first on aged drives.)
>
>
> > First, I was installed windows 7 before i did install debian 8, and the
> > drive works correctly.
> > second, I did check the burned DVD (by USB DVDRW) using another PC, and
> > readed correctly.
>
> This may be an incident. The drive might have gone ill
> around the time when you changed operating systems.
> Did you use the driven often before the change ?
>
>
> It may also be caused by the Windows burn program using
> one of the DVD-R write types "Incremental" and "DAO" whereas
> Brasero and xfburn may have used the other.
>
> What happens if you let Brasero write the ISO into an
> image file on hard disk (e.g. "image.iso") and then let
> cdrskin burn it to DVD-R ?
>
> Install package "cdrskin" and run it in a shell terminal
> window.
> Once with write type "DAO":
>
> cdrskin -v dev=/dev/sr0 -sao image.iso
>
> and once with write type "Incremental"
>
> cdrskin -v dev=/dev/sr0 -tao image.iso
>
> (Note the decisive difference between "s" and "t" in "-sao"
> versus "-tao".)
>
> Does one or both of these tries succeed ?
>
>
> > somehow I sure that this just like
> > mis-detecting the correct type of my DVD drive, or there's a list that
> > supported media type by wodim/libburn4 or the burner.
>
> Burn programs and drives have a client-server relationship.
> The burn program sends SCSI commands and the drive firmware
> decides what then to do with the medium.
> This is well standardized. There are no DVD drives known
> which would not obey the SCSI command set as described in
> documents SPC-3, MMC-5, and SBC-2.
>
>
> > This argument based on
> > the USB DVDRW that works correctly under my laptop with debian 8.
>
> The Linux kernel takes care of the SCSI commands and transmits
> them via the bus (USB, SATA, PATA, ...) to the drive.
> Inside the USB box there is probably a SATA attached DVD drive
> and a USB-SATA bridge controller.
>
> The Brasero log shows no indication that this transmission
> would have problems. The error code "3 0C 80" is the SCSI
> "Sense Code" as returned by the drive. It means that the drive
> accuses the medium of being bad.
>
> This accusation is probably wrong. I'd rather expect the drive
> to be bad.
>
>
> > another trial or suggestion maybe can help, and i will do it to help solve
> > this trouble.
>
> Make above two experiments with a ISO image file. If one of them
> works we can try to talk Brasero or xfburn into using the same
> write type.
>
> If the other fails, then you have reason to mistrust the drive.
> Both should work if drive and media are ok.
>
>
> Have a nice day :)
>
> Thomas
>
More information about the Pkg-libburnia-devel
mailing list